In Stock

DLE-30 30cc Gas Rear Carb with Electronic Ignition and Muffler

Item No.
DLE Engines - DLEG0031
$329.99
RC Club points earned on this item shown at checkout.
Product $329.99
Add Ons
Estimated Total: $329.99
Estimated Total: $329.99
Selected Store

A First-Rate Gas Power Plant – For a Low Tower Hobbies Price!

The DLE-30cc Gas Engine gives pilots premium flight performance for an affordable price. Features include a fully automatic electronic ignition unit, a muffler, a rear mounted pumper carb and an aluminum alloy crankcase.

  • Simple, lightweight design.
  • Advanced CNC machining-processed.
  • Aluminum alloy crankcase.
  • Fully automatic electronic ignition.
  • Purpose-designed cylinder, pistons and crankshaft.
  • Sealed dual crankshaft bearings.
  • High power-to-weight ratio.
DLE Engines DLE-30cc Gas Engine - carb
High-quality carb included!
DLE Engines DLE-30cc Gas Engine - Electronic Ignition Unit
Electronic Ignition Unit included!
DLE Engines DLE-30cc Gas Engine - Accessories
Loaded with "extras!" With DLE, accessories are an added value instead of an extra cost. The DLE-30 package includes a muffler, spark plug, gasket, bolts, machined aluminum standoffs, throttle arm extension & manual.
  • Two sealed bearings on crankshaft-simple design for lighter weight
  • Aluminum alloy crankcase
  • Rear mounted pumper carburetor ensures easier installation and smooth idling and dependable fuel flow during flights
  • Fully automatic electronic ignition Ignition Sensor available separately

Product Specs

Ignition Weight
4.2 oz (120 g)
Muffler Weight
2.11 oz (60 g)
Engine (Only) Weight
2 lbs (910 g)
Muffler Type
Pitts
Cylinders
Single
Total Weight
2.4 lbs (1110g)
Bore
1.42" (36mm)
Crankshaft Type
Threaded
Power Type
Gas
Plug Type
NGK CM6
Stroke
1.18" (30mm)
Product Height
1.33" (110mm) from center of crankshaft to top of cylinder head
Prop Range
18 x 8 - 20 x 8
Starter Type
Hand Held Starter
Displacement
1.86 cu in (30.5 cc)
Oil Type & Content
30:1 2-cycle oil mixture
Product Length
6.37" (162mm) from end of standoff to prop hub

Compatibility

FAQ

It's a DLE carburetor, but similar to Walbro in design and function.

Product Details

icon-box
In The Box
  • (1) DLE 30cc Gasoline Powered Engine
  • (1) Spark plug
  • (4) Standoffs
  • (1) Ignition
  • (1) Muffler
  • (1) Muffler gasket
  • (2) 5x20mm muffler bolts
  • (4) 5x60mm mounting bolts
  • (1) Product manual
icon-how-to
Needed to Complete
  • Gasoline with at least 87 octane rating
  • 2-cycle oil, mix ratio for this engine is 30 parts gas to one part oil and must be followed exactly for warranty consideration and optimum performance
  • 4.8 - 6V NiMH/NiCd, or 6.6V LiFe or 7.4V LiPo battery for ignition (separate receiver style pack can be used)
  • NOTE, 1st version ignition is marked 'A-01' on the label and requires a regulator if using 2S LiPo/LiFe battery If ignition module is the A-02 model it has a built-in voltage regulator. Model A-02 designation is located above the word "Ignition" on top of the case
  • Propeller
  • 1/8" gasoline tubing
  • Field equipment
DLE-30 30cc Gas Rear Carb with Electronic Ignition and Muffler