The 1/10 2.2 Rock Rey Rock Racer is incredibly versatile. Not only can it take on rocks with ease, this monster can bash over pretty much anything, anywhere. Through mud and water—at staggering speeds over 40 MPH. It features AVC technology, too.
Based on the Losi® Baja Rey™ platform, the 1/10th 2.2 Rock Rey™ rock racer takes no prisoners. It embodies everything drivers love about desert and rock racing culture and features a new cage and bodywork that looks just like the full-scale vehicles. This rock racer’s new front-end geometry adds the needed handling for racing while taking advantage of the Baja Rey rear-loading battery, bottom-loading motor, brushless power and AVC® system. From rocks to water to mud, you’ll experience next-level awesomeness, drive after drive.
The vehicle comes equipped with a Dynamite Fuzeâ„¢ 2800Kv brushless motor and a waterproof 130A ESC. This potent combination can handle 2S or 3S LiPo batteries (sold separately) and will allow you to hurtle across the landscape at speeds of up to 40+ mph.
The Rock Rey chassis is a brilliant blend of scale realism with functional 4WD capabilities. The foundation consists of a 3.5mm, hard-anodized aluminum chassis plate that is integrated with a realistic roll cage made of super-tough composite material. To this it adds a long-travel, independent front suspension and 4-link live rear axle that look and function exactly like their full-scale counterparts.
Bind-N-Driveâ„¢ (BND) is a transmitter-less option for RC enthusiasts who already own a surface transmitter featuring Spektrum 2.4GHz DSM Technology. This money-saving innovation allows you to add a Bind-N-Drive vehicle to your collection without the extra cost or clutter of an extra transmitter.
The unique design of the chassis allows the Dynamite Fuzeâ„¢3800Kv brushless motor to be accessed without difficulty. Drivers simply remove three screws in the bottom of the chassis and they can then effortlessly make gear changes and service the motor.
To help withstand the trials and tribulations of off-road driving, the Baja Reyâ„¢ desert truck was built on a durable reinforced composite chassis with a bottom load battery compartment. Quickly and easily make battery changes without removing the body or wrestling with battery straps.
The single-speed transmission, as well as the front and center diffs, are sealed against the elements and engineered to handle the abuse of a high-output brushless motor and punishing terrain. MOD 1 gears further increase the durability of this desert beast.
The long-travel shocks do a fantastic job of soaking up the energy from big bumps and jumps. They also feature threaded shock bodies with adjustment collars so you can fine tune the pre-load settings of the coil-over springs. External bump stops provide plush landings on the hardest surfaces.
The Rock Rey™ desert truck is loaded with waterproof electronics including the receiver, servo and ESC. Everything is sealed against the elements allowing you to splash in the rain, spin in the mud and make tracks in the snow. It’s full-throttle freedom to run anytime, rain or shine.
The four piece bolt-on body panels give the truck an authentic factory look. Eliminating the need for body posts that spoil the scale look, these panels are polycarbonate for incredible durability and rugged good looks. You also get a molded interior that includes a driver and rider figure, both of which sport racing helmet and harness details.
The fun doesn’t stop even when the sun goes down with the Rock Rey™. Twelve brilliant LEDs on the integrated light bar cast more than enough illumination for running at night. Plus, the body-mounted LEDs place only a small demand on the battery allowing you to stay out all night!
Approximate Assembly Time: | Less than 1 Hour |
Ball Bearings: | Full Ball Bearings |
Body: | 4 Piece Screened body |
Chassis: | 3.5mm Aluminum |
Completion Level: | Bind-N-Drive |
Differential: | Locked Rear, Gear Diff Front and Rear - Sealed |
Drivetrain: | 4WD |
Final Drive Ratio: | 32.30:1 |
Front Track: | 12.75 in (323.8mm) |
Gear Pitch: | 1.0 Module |
Ground Clearance: | 2.2 in (55 mm) |
Height: | 8.75 in (222.3mm) |
Length: | 20.75 in (527mm) |
Motor Size: | 550 |
Motor Type: | Non-Sensored Brushless 550 6-pole 2800Kv |
Pinion: | 12T |
Rear Track: | 12.75 in (323.8mm) |
Shock Type: | Oil-Filled/Coil-Over Spring |
Size/Scale: | 1/10 |
Suspension: | Independent front / 4-Link Rear |
Tire Compound: | Medium |
Tire Diameter: | 4.45 in (113 mm) |
Tire Tread: | Desert Claws |
Track: | 12.75 in (323.8mm) |
Weight: | 6.55 lb (3.0kg) |
Wheel Diameter: | 2.2 in (55.9mm) |
Wheel Type: | 2.2 in 955.9mm) Glue-Type |
Wheel Width: | 1.6 in (40.75mm) |
Wheelbase: | 15.0 in (381mm) |
Width: | 12.75 in (323.8mm) |
Technical questions about this Losi product should be directed to Horizon Hobby's Product Support Department:
Horizon Hobby, LLC.
ATTN: Product Support
2904 Research Road
Champaign, IL 61822
To place a Horizon Hobby Support Inquiry please visit our Inquiry Form Support Phone:(877) 504-0233
Fax:(217) 355-1552
If you would like to purchase this product, please go to the Store Locator or contact the Horizon Hobby Consumer Sales Department:
Horizon Hobby, LLC.
ATTN: Consumer Sales
2904 Research Road
Champaign, IL 61822
Email: websales@horizonhobby.com Sales Phone:(800) 338-4639
Fax:(217) 355-1552
Stay in the Know: Sign up to join our Mailing List