1/8 Yeti XL 4WD Kit
1/8 Yeti XL 4WD Kit
1/8 Yeti XL 4WD Kit
1/8 Yeti XL 4WD Kit
1/8 Yeti XL 4WD Kit
1/8 Yeti XL 4WD Kit
1/8 Yeti XL 4WD Kit
1/8 Yeti XL 4WD Kit
1/8 Yeti XL 4WD Kit
1/8 Yeti XL 4WD Kit
1/8 Yeti XL 4WD Kit
1/8 Yeti XL 4WD Kit
1/8 Yeti XL 4WD Kit
1/8 Yeti XL 4WD Kit
1/8 Yeti XL 4WD Kit
1/8 Yeti XL 4WD Kit
1/8 Yeti XL 4WD Kit
1/8 Yeti XL 4WD Kit
1/8 Yeti XL 4WD Kit
1/8 Yeti XL 4WD Kit
Discontinued | This Item is No Longer Available

1/8 Yeti XL 4WD Kit

Item No.
Axial - AXIC9038
Write a Review
Selected Store
Needed to Complete
  • 2-channel radio
  • Metal gear, high-torque steering servo
  • 1/8 scale brushless 4-pole Power System
  • Two 2S or 3S LiPo Packs with connector to match ESC, 25C minimum discharge rating
  • Suitable Charger
  • Four AA Batteries for Transmitter
  • LiPo charge bag, maintenance and trail equipment
What's in the box?
  • (1) 4WD Yeti XL Rock Racer Kit with Body, Tires, Wheels, Shocks, Decals 3 Driver Helmets, Interior Tray, Spare Wheel and Tire
  • (1) User Manual

Specifications

    Vehicle
  • Length: 18.1" (460mm)
  • Width: 8.8" (225mm)
  • Height: 9.0" (229mm)
  • Wheelbase: 12.0" (305mm), optional link kit allows wheelbase adjustment to either a 11.4" 12.0" or 12.3" wheelbase
  • Ground Clearance: 2.7" (68mm)
  • Weight: 4.65lbs (2.1kg) approximately, with electronics
  • Optimized Gear Ratio: 3.75:1
  • Final Drive Ratio (FDR): 42.00, stock (33.69-54.15 with different spur/pinion gear combinations, extra spur and pinion gears must be purchased separately)
  • Adjustable Battery Tray Dimensions: 5.75 x 1.2" (147 x 32mm)
    Body
  • Length: 17.5" (444mm)
  • Width: 6.25" (159mm)
  • Height: 6.4" (162mm) bottom of body to top of roll cage 3.3" (84mm) bottom of body to top of driver's door

Key Features

  • Chassis: Composite plastic with integrated upper and lower aluminum braces for greater stiffness, multiple upper link positions to adjust anti-squat
  • Drive: Four wheel shaft, AR60XL OCP solid rear axle, WB XL CVJ rear driveshaft with captured cross pin design-no set screws to lose front CVJ metal universals, adjustable steel turnbuckles
  • Shocks: Icon Vehicle Dynamics threaded aluminum Big Bore 16, dual rate springs
  • Steering: Dual shear rack
  • Transmission: All metal gears, full ball bearings, single speed with high gear installed
  • Slipper Clutch: Dual slipper design with aluminum pad on each side of 32P spur gear for right amount of slip, and heat resistance
  • Roll Cage: Y-480 flexible plastic, resembles welded steel tubes
  • Receiver Box: Waterproof, with three silicone seals (electronics not included)
  • Weight Box: Black plastic, styled to resemble a scale fuel cell, may be used as an additional electronics box
  • Tires: Oficially licensed 3.8" (96mm) Falken WildPeak M/T S30 compound
  • Wheels: Officially licensed Raceline Monster wheels, 3.8" (96mm) diameter, 17mm hexes
  • Front Suspension: Independent, maintains high-speed stability and travel direction when encountering the roughest of terrain
  • Rear Suspension: 4-linked Long travel sway bar (medium 3.4mm), 3mm aluminum lower link plates
  • Body: Clear polycarbonate .040" (1mm) thick, with interior tray, three driver helmets, decals, spare wheel and tire

Product Specs

Manufacturer #
AX90038
Power Type
Electric
Gear Pitch
32-Pitch
Shock Type
Aluminum
Ground Clearance
2.48 in (63mm)
Product Length
25.8 in (654mm)
Wheelbase
18.5 in (470mm)
Inner Tire / Outer Wheel Diameter
3.8 in (96mm)
Product Width
16.3 in (414mm)
Wheel Hex Size
17mm
Product Weight
12.75 lb (5.78 kg)
Vehicle Type
Buggy
Water-Resistant
Yes
Completion Level
Kit
Drivetrain
4WD
Product Height
11.1 in (282mm)
Body
Clear
Scale
1/8

Video Overview

chat_icon