Subtotal:
$0.00
Cart:
0
$50 until Free Shipping*
Give us a Call: 800-338-4639
Important Bulletin
Important Bulletin
PRODUCT RECALL: Blade 700 X Spindle Washer Recall |  | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| August 22, 2013 Product: BLH5725 Blade 700 X Pro Series Kit, BLH5725C Blade 700 X Pro Series Combo, BLH5703 Blade Spindle Set (2): 700 X Defect Issue: This product recall addresses the washers that secure the Main Rotor Grip to the Head. There is a possibility these washers may fail, causing the main blades to separate from the head. The separation of the main blades from the head during flight will cause a product failure, and may result in damage to property and injury. What To Do: Perform the corrective action below. These washers will be replaced by Horizon Hobby at no charge. | |||||||||||||||||
Corrective Action: | |||||||||||||||||
| |||||||||||||||||
Corrected kits and combos will have two white, circular stickers with Horizon Hobby printed in black resealing the box. Corrected spindle sets will have a marked black dot to the right of the part number on the front of the header card. We apologize for this inconvenience. Horizon disclaims all liability and warranties for any consumer failing to act upon this product recall. | |||||||||||||||||
| |||||||||||||||||
Categories
- Overview
- Specs
- Reviews
- Parts & Accessories
- Completion Guide
- Manuals & Support
Key Features
- Integrated bearing block servo mount design with optimized geometry
- Direct-to-swash, flybarless head design
- 2mm carbon fiber main frames
- CNC machined aluminum head block
- CNC machined aluminum swashplate
- Dual ball bearing supported, 12mm hollow steel main shaft
- Motor mount with integrated pinion support
- Configurable, quick change battery tray
- Torque-tube driven tail with aluminum tail boom and case
- Dual point tail pitch slider and balanced tail grips
- Captured servo ball link arms
- Two flybarless unit mounting locations (forward and aft)
Needed To Complete
- 6+ Channel Transmitter
- Receiver
- Servos
- Speed Control
- Motor
- Battery
- Main Rotor Blades
- Tail Rotot Blades
- Receiver Battery
- Charger
- Building Tools
Video Overview
Overview
The Blade® 700 X is the flagship of the Pro Series line. It has been engineered to not only dominate the 700-class, but redefine its standards for performance. The centerpiece of the 700 X design is its unique servo mounting geometry that virtually eliminates any mechanical inefficiency between the cyclic servos and swashplate. The result is flawless cyclic and collective response that feels almost telekinetic.
With its optimized cyclic servo geometry, quick change battery tray, helical main gear and its lightweight low parts count design, the 700 X is surely a helicopter that will turn heads at the field.
| Approximate Assembly Time: | 7-10 Hours |
| Approximate Flight Time: | 4 minutes |
| Battery: | (2) 22.2V 6S 4400-5000mAh Li-Po |
| Channels: | 6 |
| Completion Level: | Kit |
| Flying Weight: | 11.0â11.6 lb (5.0â5.8kg) |
| Main Blade Material: | Carbon fiber |
| Main Gear Ratio: | 10.1:1 |
| Main Motor Size: | 480-560Kv brushless outrunner, 4x30mm bolt pattern |
| Main Rotor Blade Length: | 690mm |
| Pinion Size: | 13 tooth |
| Prop Diameter: | 64.4 in (1635mm) |
| Rotor Type: | Collective Pitch Single Rotor |
| Size/Scale: | 700 |
| Speed Control: | 100-160A HV brushless ESC |
| Swashplate Type: | 120-degree CCPM |
| Tail Blade Material: | Carbon fiber |
| Tail Drive: | Shaft |
| Tail Rotor Blade Length: | 115mm |
| Tail Rotor Diameter: | 12.0 in (306mm) |
Parts Listing
$44.99
$38.24
Hop Ups
$19.99
$18.99
Airbrush Fiberglass Sea Monster Canopy: Blade 700 X
MHE700X080SM
$74.99
$59.99
Airbrush Fiberglass XPro Canopy: Blade 700 X
MHE700X080XP
$74.99
$59.99
Aluminum Tail Boom Support Brace, Red: Blade 700 X
MHE700X149AB
$20.99
$18.89
Aluminum Tail Boom Support Brace: Blade 700 X
MHE700X049AB
$20.99
$18.89
Aluminum Tail Pitch Lever, Red: Blade 700 X
MHE700X126
$18.99
$18.04
Optional Accessories
$149.99
$104.99
Recommended Completion Items
Recommended
Heli 700 Brushless Outrunner Motor, 520Kv
EFLM60700B
$259.99
$207.99
AR7200BX 7CH DSMX Flybarless Control System
SPMAR7200BX
$206.99
$165.59
$149.99
$104.99
Manuals
- 700 X Pro Series Manual – English
- James Haley Castle Creation ESC Set Up Files
- 700 X Pro Series Manual – Italian
- 700 X Pro Series Manual - French
- 700 X Pro Series Manual - German
FAQs
Product Support Tips
Product Support
Technical questions about this Blade product should be directed to Horizon Hobby's Product Support Department:
Horizon Hobby, LLC.
ATTN: Product Support
2904 Research Road
Champaign, IL 61822
To place a Horizon Hobby Support Inquiry please visit our Inquiry Form Support Phone:(877) 504-0233
Fax:(217) 355-1552
Sales Support
If you would like to purchase this product, please go to the Store Locator or contact the Horizon Hobby Consumer Sales Department:
Horizon Hobby, LLC.
ATTN: Consumer Sales
2904 Research Road
Champaign, IL 61822
Email: websales@horizonhobby.com Sales Phone:(800) 338-4639
Fax:(217) 355-1552
