In Stock

HS-785HB Giant Scale Analog Karbonite Gear Sail Winch Servo

Item No.
Hitec RCD Inc. - HRC33785S
$54.99
RC Club points earned on this item shown at checkout.
Product $54.99
Add Ons
Estimated Total: $54.99
Estimated Total: $54.99
Selected Store

Overview

The HS-785HB sail winch servo with it's large drum wheel has 3 1/2 revolutions of travel for hauling in even the largest of sails. With its dual ball bearing supported output shaft the HS-785HB will provide years of reliable service.

  • Speed: @4.8V 1.68sec/60' / @6.0V 1.38sec/60'
  • Torque: @4.8V 153oz/in / @6.0V 183oz/in
  • Large Drum Wheel with 3.5 Revolutions of Travel
  • Strong Karbonite Gear Train
  • Dual Ball Bearing-Supported Output Shaft
  • Water and Dust-Resistant Case

Key Features

  • Dual Ball Bearing Supported Output Shaft
  • Large Drum Wheel
  • Perfect replacement winch servo for the Pro Boat Ragazza
  • *** Warning: Do not use thread lockers on Karbonite geared servo as it will cause the output shaft to fail

Detailed Information

Hitec Servo Chart

Product Specs

Product Weight
3.88oz (110.0g)
Spline Count
24 - Tooth
Water-Resistant
No
Deadband
5 µs
Input Voltage
4.8V ~ 6.0V
Product Height
1.96" (50 mm)
Servo Type
Analog
Current Draw Idle
8 mA
Product Width
1.14" (29 mm)
Torque
@4.8V 153oz/in / @6.0V 183oz/in
Product Length
2.32" (59 mm)
Bearing
Dual Ball Bearing
Bushing Or Bearing
Bearing
Gear Type
Karbonite
Current Draw Stall
1,800 mA
Motor Type
Brushed
Servo Operating Voltage
4.8 - 6.0V
Maximum Servo Torque
183oz/in
Programmable
No
Servo Size Category
Giant Scale
The HS-785HB sail winch servo with its large drum wheel has 3 1/2 revolutions of travel for hauling in even the largest of sails. With its dual ball bearing supported output shaft the HS-785HB will provide years of reliable service.

Product Details

icon-box
In The Box
  • (1) HS-785HB Giant Scale Analog Karbonite Gear Sail Winch Servo
HS-785HB Giant Scale Analog Karbonite Gear Sail Winch Servo