RC Car and Truck Parts & Accessories

Adjustable Front Hinge Pin Holder Set: TEN

Front CV Drive Shaft Set, HD: CCR, NCR, NCR SE

F/R CV Driveshaft Coupling Set: 8B,8T

Brake Disk Set: 8B 2.0

Inner Axle Bearings, 20x32x7mm (2): 5IVE-T, MINI WRC

Clutch Bell Bearings, 15x28x7mm (2): 5IVE-T, MINI WRC

3mm BH & Cap Screw Asst (38): 5IVE-T, MINI WRC

Antenna Caps: 8X, 8XE

ESC Platform: CCR, NCR SE

Shock Shaft, 1.2" Ti-Nitride

15mm Shock Piston/Guide Set: 8B, 8T

Lock Nut Asst. 3,4,5,6MM (24): 5IVE-T, MINI WRC

Lower Suspension Link Mounts and Pin: CCR, NCR SE

HD Steering Link Set: 8B 2.0

Suspension Balls 8.8mm: 8B, 8T

Suspension Balls 6.8mm: 8B 2.0

1/8" E-Clips

Flat Head Screws, 4-40 x 3/8" (10)

Button Head Screws, 4-40 x 3/8" (6)

Wheel Nuts & Pins (4ea): 8B,8T

Front/Rear CV Drive Shafts (2): 8T 2.0

Servo Mounts, Plate and Hardware: CCR, NCR SE

Flat Head Screws, 4-40 x 5/16" (6)

Flat Head Screws, 5-40 x 3/4" (10)

Cap Screw, 2-56 x 5/16" (6)

Front Bumper, Tank, Filter Guard: 8B, 8T

Shock Spring Clamps & Cups

Shock Standoff Set: 8B, 8T

5mm E-Clips (12)

Socket Head Screws, 4-40 x 1/2" (10)

Rear Suspension Arm Set (2): MINI WRC

1/2" x 3/4" Sealed BB

5x10mm Shielded Ball Bearing (2)

Flat Head Screws, 4-40 x 5/8" (10)

Caphead Screw, 5-40 x 1/2" (8)

Button Head Screws, 2-56 x 1/4" (10): 8X, 8XE

Button Head Screws, 8-32 x 5/8" (8)

High Endurance Clutch Bell, 12T: 2.0

Metal Servo Arm Insert, 23 Spline, JR (2): 8X, 8XE

Button Head Screws, 5-40 x 1" (4)

Button Head Screws, 5-40 x 20mm BHS, Left Hand Thread: 8B

Hardened Washers, #4 and 1/8"

Flat Head Screws, Steel, Black Oxide, M4 x 16mm (10)

Pivot Ball Set, Hard Anodized (16): TEN

Set Screws, Steel, Black Oxide, Flat Point, M4 x 6mm (10)

Front Spindle & Carrier Set: 10-T

Shock Mount Set (4): 5IVE-T, MINI WRC

Button Head Screws, Steel, Black Oxide, M4 x 14mm (10)

Top Brace: TEN-SCTE

Front Shock Body Set, Hard Anodized (2): 5IVE-T, MINI WRC

Set Screw M4 x 4mm Cup Point(10)

Battery Mounting System, RTR: SCTE

Chassis Braces, RTR: SCTE

Flat Head Screws M2.5 x 5mm (10)

Rear Hub Carriers: 8B 2.0

15mm Shock Bladders: 8B, 8T

Front King Pins & Arm Bushings, Aluminum 5IVE-T, MINI WRC

Shock O-ring Set: 8B, 8T

HD Rod Ends & Balls: 8B, 8T

Suspension Balls 8.8mm Flanged: 8B, 8T

Socket Head Screws, 4-40 x 3/8" (10)

Flat Head Socket Screw, 4-40 x 1/4" (6)

Rear Hubs, Aluminum: TEN

Front/Rear Sway Bar Kit: 10-T

Motor Mount with Adapter: TEN-SCTE

Fr/R CV Couplers (4): 10-T

Rear Bumper Pack: TEN-SCTE

Rear Shock Body Set, Hard Anodized (2): 5IVE-T, MINI WRC

Flat Head Screws, 5-40 x 1/2" (10)

Button Head Screws, 5-40 x 5/8" (8)

Shim Set, Metric 5mm/6mm

Flat Point Setscrews, 5-40 x 1/8" (8)

Lower Shock Cap, Aluminum: (2): 5IVE-T, B

Brake Cams & Bushings (2): 5IVE-T, MINI WRC

Sealed Ball Bearings, 10mm x 15mm (2): 22/22-4

5x11x4 Rubber Sealed Ball Bearing (4): 8X, 8XE

5 x 10mm HD Clutch Bearings (2): 8B/8T

Diff Pinion Bearings, 9x20x6mm (2): 5IVE-T, MINI WRC

4mm FH & Cap Screw Asst. (32): 5IVE-T, MINI WRC

Flywheel & Collet, Steel, 4 Shoe: 8B, 8T

Fr/R Driveshafts (2): 10-T

Throttle/Brake Link Set: 8B 2.0

Servo Arm, Aluminum: Hitec

Replacement Inserts, Adj FR Hinge Pin Holder: TEN

Engine Mount Inserts & Screws 18 58 (4): 5IVE-T, MINI WRC

Sway Bar Set: 8B,8T

Adjustable Front Hinge Pin Brace with Inserts: 8B/8T

Front CV Drive Shaft HD: CCR, NCR, NCR SE

Diff Support Bearings, 15x24x5mm, Flanged (2): 5IVE-T, MINI WRC

Shock Ends & Cups (4)

15mm Shock Shaft 4 x 57mm TiNi (1): 8B, 8T

Body Posts: TEN-SCTE

Steering Posts/Tubes & Hardware: 10-T

Front Bumper Pack: TEN-SCTE

15mm Shock Ends, Cups, Bushing: 8B 2.0

Ball Studs and Ends, 4-40 x .215"