RC Plane Parts

Updated Main Gear Leg Set: Slow Ultra Stick 1.2m

Nose Cone: Habu 80

Threaded Coupler, 4-40

4-40 Gold-N-Clevises (12)

Wing Bolts, Nylon 1/4-20 X 3" (4)

Hinge, Nylon (15)

Wing Mount, Rear: UMX Slow Ultra Stick

2-56 Quick Release Ball Link

2 3/8" Wing Tip/Tail Skid (2)

Socket Head Screw, 2 x 1/2

Vertical Stabilizer: Turbo Timber SWS 2.0m

Roof & Cage Set: Mojo, Jetstream

Wing Joiner Tube Strega 20-30cc EP ARF

2-56 Threaded Eyebolts (4)

Semi-Scale Tailwheel System: 40-90

Wire, 36", 8 AWG, Black

Wing Joiner Tube Dolphin Mk2 GP EP ARF

Threaded Insert, 6-32

Fuselage: Aermacchi MB-339 60-86N - Military

After Run 2 Engine Cleaner and Corrosion Inhibitor, 1 oz

Vertical Stabilizer Stinson GP EP ARF

Pushrods, 36" Cable .056" with Clevis(2)

Wheel Set (Wheels and Axles): EC-1500

Landing Gear Set: XCub 450mm

Battery Hatch: Draco 800mm

4-Blade Propeller: UMX P-51 "Detroit Miss"

Inflatable Tire Air Pump with Needle

1 inch Spinner Nut 8mm x 1.25mm: P-47D-1 60

Steel Pin Hinge Points (6)

#2 Flat Washer

Nose Gear Electric Retracts: A-26 Invader Electric/Gas ARF

Hinge, Nylon, Small (6)

Pushrod Housing, 30" (18)

Inner Gear Doors with Hardware: P-51D 50-60cc

Canopy Edge 540 .91 ARF

Prop Adapter 6mm: Cherokee 1.3m

Socket Head Cap Screws, 3mm x 8

1 inch Spinner Nut 5/16mm x 24mm: P-47D-1 60

Hatch with Pilot: Cherokee 1.3m Blue

Power Model Jet Oil 5 Liter

Exhaust Deflector: .35 to .90 Engines

4-Stroke Throttle Linkage

Wheel Set Mains 60mm, Nose Wheel 44mm: Habu 80

Threaded Rod Ends

Charge Receptacle: JR/HRC/AIRZ

Spinner: Super Timber 1.7m

Treaded Wheel, 4", Large Scale (1)

Micro Control Horn (2)