TEKNO RC LLC Left & Right +/-2mm Rear Hubs & Bearing Spacers, 1/8 Tekno EB/MT/NB48 2.2

Improve the handling of your Tekno RC EB/NB48 2.X vehicles with these new +/-2mm rear hubs! Our drivers discovered that the -2mm position (closest hole to the bearing) increased rear end grip, stability, and predictability on all track conditions during testing. Although these hubs include an optional high roll center setting (hinge pin further away from the bearing), it was rarely used during our testing. Vehicle Compatibility: TKR9054B - Rear Hubs and Bearing Spacers is included with the EB48 2.2, MT48 2.0, and NB48 2.2 kits and can be used as a replacement part for those vehicles. This can be used with the EB48 2.1 and NB48 2.1 vehicles and should be a direct replacement for the stock part or used as a new feature. Please use the instruction manual for the kit(s) listed to verify compatibility and no additional items are necessary before purchasing.