SRX210 FHSS 2-Channel Receiver and ESC
SRX210 FHSS 2-Channel Receiver and ESC
In Stock

SRX210 FHSS 2-Channel Receiver and ESC

Item No.
Spektrum - SPMSRX210
5
$32.99
RC Club points earned on this item shown at checkout.
Product $32.99
Add Ons
Estimated Total: $32.99
Estimated Total: $32.99
The link to SRX210 FHSS 2-Channel Receiver and ESC has been copied
Selected Store

Product Specs

Band
2.4GHz
Channels
2
Modulation
FHSS
Programmable
No

Compatibility

No results for your given fitment filters

Get Info From Communities

RC 101
Buying Guides
Troubleshooting
Downloads
How-To's

FAQ

This item will bind to the STX-3. 1. Power OFF the ESC/Receiver and transmitter. 2. Connect a fully charged battery to the ESC/Receiver. 3. Power on the ESC/Receiver. It will beep once and the LED will flash rapidly, indicating it is in bind mode. 4. To put the STX2 transmitter into bind mode,hold the steering wheel fully to the right wheel after 2 seconds. while powering on the transmitter. Release the steering 5. The LED on the ESC/Receiver will go solid and the ESC/Receiver will make a rising tone, indicating the bind is successful. You must rebind when binding the receiver to a different transmitter

This item will bind to the STX-3. 1. Power OFF the ESC/Receiver and transmitter. 2. Connect a fully charged battery to the ESC/Receiver. 3. Power on the ESC/Receiver. It will beep once and the LED will flash rapidly, indicating it is in bind mode. 4. To put the STX2 transmitter into bind mode,hold the steering wheel fully to the right wheel after 2 seconds. while powering on the transmitter. Release the steering 5. The LED on the ESC/Receiver will go solid and the ESC/Receiver will make a rising tone, indicating the bind is successful. You must rebind when binding the receiver to a different transmitter

No, this requires FHSS modulation such as a STX2 or STX3

No, this is a FHSS receiver that only works with the STX2 and STX3. It does not have DSM, DSM2 or DSMR.

This will work with the Spektrum STX-2 and STX-3.
The Spektrum ESC/Receiver is an all in one unit featuring an EC3 battery connector, a convenient on-off switch and it's water resistant for peace of mind when water splashes on your electronics. WARNING: This product is only compatible with NiMH batteries. Do not use a LiPo battery or fire causing serious injury or damage to property may occur.