Power 10 Brushless Outrunner Motor, 1100Kv: 3.5mm Bullet

Name: Power 10 Brushless Outrunner Motor, 1100Kv: 3.5mm Bullet
Brand: E-flite
SKU: EFLM4010A
Price: 59.99 USD
Availability: InStock

EFLM4010A

Power 10 Brushless Outrunner Motor, 1100Kv: 3.5mm Bullet

EFLM4010A

$59.99

Earn points on this item ⓘ

In Stock

Product Details

Quick Links

Manuals & Support

Key Features

Equivalent to a 10-size glow engine for 32–48 ounce (910–1360 g) airplanes
Ideal for 3D airplanes weighing 28–36 ounces (790–1020 g)
Ideal for models requiring up to 450 watts of power
High-torque, direct-drive alternative to inrunner brushless motors
Includes mount, prop adapters and mounting hardware
External rotor design—5mm shaft can easily be reversed for alternative motor installations
Slotted 14-pole outrunner design
High-quality construction with ball bearings and hardened steel shaft
Quiet, lightweight operation

Needed To Complete

40A ESC
6- to 10-cell Ni-MH/Ni-Cd or 2–3S Li-Po
10x5 to 12x6 electric props

Overview

The Power 10 is designed to deliver clean and quiet power for 10-size sport and scale airplanes weighing 32 to 48 ounces (910 to 1360 grams), 3D airplanes weighing 28 to 36 ounces (790 to 1020 grams), or models requiring up to 450 watts of power. It’s an especially good match for the E-flite Brio 10 for high speed F3A precision or artistic aerobatics.

Product Specifications

Specs

Bushing Or Bearing	Bearing
Connector Type	3.5mm Bullet
Idle Current (Io)	2.10A @10V
Motor Design	Outrunner
Motor Type	Brushless
Recommended Prop Range	10x5–12x6
Resistance	.043 ohms
RPM/Volt (Kv)	1100
Shaft Diameter	5mm (.20 in)
Voltage	7.2–12
Wire Gauge	16 AWG

21 Reviews

2 Questions \ 2 Answers

ask a question

write a review

(15) (6) (0) (0) (0)

Show all reviews

ask a question

write a review

Thank you for posting a review!

We value your input. Share your review so everyone else can enjoy it too.

Thank you for posting a review!

Your review was sent successfully and is now waiting for our staff to publish it.

Thank you for posting a question!

Please click on the link in the confirmation email we just sent you to submit your question.

Your question will appear on the site once someone answers it.

Reviews (21)
Questions (2)

Updating Results

05/09/21

Hene

01/20/11

Great Efficient Power!

Like several others, I bought this motor for my Parkzone T-28. I was a little uneasy at first, wondering if the extra weight and power would screw up the way my plane handled. Most of all, I was concerned about how my run-time would be affected.
Let me just say that I have been extremely pleased and surprised by this motor.
-It runs very smooth, and is quiet.
-It has enough power to pull my T-28 out of a verticle stall (even with the extra weight of two flap servos and several complete layers of paint).
-The speed (with the stock 9.5 x 7.5 prop) is a thrill around 3/4 throttle.
-Doing mixed flying with a 2200 pack, I consistently get 14-16 minutes of flight. (This is with a combination of easy flying at 1/2 flap in addition to some good vertical climbs and several high speed passes)

I'd get this motor again in a heartbeat! ...Ok, better yet, my new P-47 was kinda dull after being used to the PZ Trojan with a Power 10.
(I see a Power 25 on my P-47 in the near future!)

Image of Review by Hene on 20 Jan 2011 number 1

On Power 10 Brushless Outrunner Motor, 1100Kv: 3.5mm Bullet

Johnbear

08/01/12

what a beast

Bought one of the power 10"s and it bolts right into
the park vone coursair. Didn't have to change trim at all.
Using a 10x7 prop and 2200 65 C 3S battery & a 54 amp esc.. What a Beast.
It's bullistic, what a rush.Have to be careful not to rip the wings off.
Unlimited vertical. With throttle management I can fly for 7 to 8 minutes.
If you like speed this is the setup.

On Power 10 Brushless Outrunner Motor, 1100Kv: 3.5mm Bullet

Crazyflyboy30

05/22/10

No. 1 in my book

No. 1 in my book you can't go wrong E-flite this my sixth E-flite motor I have 300,450 ,10,25,32,60 and counting put it in my E-flite 20-300 biplane it pull it hard the airplane weight is 41oz. the motor has 4lb. or 64oz. of thrust that is more than 1 1/2 thrust to weight and will fly for 8min. on a 2100mah. battery .

On Power 10 Brushless Outrunner Motor, 1100Kv: 3.5mm Bullet

Daytona6000

01/09/18

Great Motor!

I run this motor is so many of my various planes I've lost count! Here's a few, Parkzone P-51D, Wildcat, Corsair, Sport Cub, E-flite Valiant, Multiplex Solius, Heron, and Easy Glider Pro, etc. Run it with a 45 amp esc and you won't be disappointed!

On Power 10 Brushless Outrunner Motor, 1100Kv: 3.5mm Bullet

Anonymous

06/11/17

My Go To Motor!

Super great motor! Here are the planes that I currently have that I have replaced the stock motor with using this E-Flite Power 10 motor: E-Flite’s Valiant and Pawnee Brave, Parkzone’s P-51D, F4F Wildcat, Sport Cub, and F4U Corsair, Multiplex’s Heron, Solius, and Easy Glider Pro. Just a great motor!

On Power 10 Brushless Outrunner Motor, 1100Kv: 3.5mm Bullet

Merv

02/02/21

Q: Is the power 10 able to go to 4 cell lipo ?

Store Owner

02/02/21

A: 4S LiPo is not recommended for this motor.

Jesse

09/24/20

Q: How easy is it to reverse the shaft?
Does it come with a prop adapter?

Store Owner

09/28/20

A: Reversing the shaft is relatively simple, and the instructions outline the process.
A prop adapter is included.

Points per $1 Spent	Standard	Pro	Legend
Points per $1 Spent	10	12.5	15

Power 10 Brushless Outrunner Motor, 1100Kv: 3.5mm Bullet

Power 10 Brushless Outrunner Motor, 1100Kv: 3.5mm Bullet

Selected Store

Product Details

Quick Links

Key Features

Needed To Complete

Overview

Product Specifications

Specs

WRITE A REVIEW

ASK A QUESTION

Shop

Support

Company Info

Legal