MXS 1100mm PNP V2 with Reflex, Green
In The Box
- (1) MXS 1100mm PNP V2
- (1) Product Manual
Needed to Complete
- (1) Full Range 6+ Channel Transmitter and Receiver
- (1) 3S 11.1V 2200mAh LiPo Battery
- (1) LiPo Battery Charger
Introducing the version 2 1100mm MXS 3D aerobatic plane from Rochobby. Designed for the intermediate to advanced 3D pilot & built specifically for 3D Flight, the version 2 MSX is now even better to please the most capable of 3D pilots.
- Easy to assemble, only needs glue for wing tip Vortex generators
- New hollow wing design for reduced weight and rigidity
- Wing tip Side Force Generators for superior Knife Edge and slow maneuvering
- Super strong laminated control surface hinges
- Upgraded Powerful 3541-1230kv Outrunner motor
- 40amp ESC
- Upgraded 4 digital full metal gear servos
- Wings and tail remove for transport, however the 1100mm size makes transportation easy
- New ultra-visible green and black high contrast paint scheme
- Upgraded extended Horizontal stabilizers and Vortex Generator for better performance
Built from super strong EPO foam, the receiver ready MXS is glueless - ready to assemble requiring only 10 screws. Add your 4 channel receiver and 3s 2200mAh battery and you are ready to fly. Strong tube spars in the wing and tail create a super rigid structure that can withstand even the harshest 3D punishment. The updated powerful 3541-1230kv Outrunner, 40amp ESC, and 4 full Metal Gear Digital servos are pre-installed and ready to fly out of the box. The preinstalled precision ball links and rods expedite assembly time and provide precise control of nearly any aerobatic maneuver desired.
Extra long servo arms are designed in an over-center position from the control surface horns to provide massive amounts of control surface throw for low speed Harrier and hovering flight. Wing tip Side Force Generators further enhance the low speed performance by directing the airflow over the ailerons for more positive control. Tough but lightweight aluminum landing gear and large 2 1/2" wheels make grass takeoffs and landings a breeze. A large, magnetic hatch makes changing the battery quick and easy!
Painted in bright green and black, the new version 2 MXS is sure to get attention at the flying field... Easy to assemble, built tough and 3D ready.... Look no further than the New MXS from Rochobby
Complete System Upgrade - Reflex V2 is Compatible with Most FMS Aircraft
The Reflex V2 is a user-upgradeable flight controller. Reflex V2 can be reprogrammed easily with different model files via a simple software - allowing pilots to use the same flight control unit as they progress to different aircraft. Flying is simple when you have your very own “co-pilot” — the Reflex V2!
Three flight modes are available: Stabilized, Optimized or Off. This is controlled with a two or three position switch on the transmitter. When assigned to a two position switch, the Reflex system changes between stabilized and optimized modes.
Stabilized mode: Designed for beginners, Reflex will rapidly level the aircraft from any attitude when this mode is activated. Stabilized mode combines accelerometer and gyro data to determine how to level the aircraft when the control sticks are released - giving pilots absolute peace of mind. Note: The aircraft will maintain level flight with 50-60% throttle, and the aircraft will climb under full throttle.
Optimized mode: Utilizing advanced solid-state gyros, the Reflex system maintains aircraft attitude by counteracting inflight upsets - for gusts to crosswinds. With Reflex, even small aircraft will fly with the confidence of something much larger!
Off: Turns off all gyro functionality, the aircraft is flown completely manually when the gyro is off.
Reflex V2 Overview
|43.3" (1100 mm)
|Minimum Required Radio
|43.8" (1113 mm)
|405.9sq in (26.12 sq dm)
|Approximate Flight Time
|Around 4 minutes
|Approximate Assembly Time
|Less than 1 Hour
|11.5 x 5.5
|CG (Center of Gravity)
|(85-90mm) From Leading Edge
|0.068oz/sq in 30.3g/sq dm)