MX10 1/10 Gen 2 200A ESC
MX10 1/10 Gen 2 200A ESC
MX10 1/10 Gen 2 200A ESC
MX10 1/10 Gen 2 200A ESC
MX10 1/10 Gen 2 200A ESC
MX10 1/10 Gen 2 200A ESC
MX10 1/10 Gen 2 200A ESC
New | In Stock

MX10 1/10 Gen 2 200A ESC

Item No.
Trinity/Epic - TEP0013
Write a Review
$212.99
RC Club points earned on this item shown at checkout.
This product may require additional items in order to work out of the box. See below for required items that may be needed to complete.
Wireless Module

I do not need to purchase this item.

MX10 Gen 2 Wireless Module
TEP0013
MX10 Gen 2 Wireless Module
TEP0015
In Stock
$31.99
0 of 1 Selected
Product $212.99
Add Ons
Estimated Total: $212.99
Estimated Total: $212.99
The link to MX10 1/10 Gen 2 200A ESC has been copied
Selected Store

Trinity MX10 Gen 2 200A Sensored ESC Overview

The Trinity MX10 Gen 2 200A Sensored ESC has been designed for the most competitive 1/10 and 1/12 scale stock and mod racers. The MX10 offers an industry leading 200-amp constant power rate and an incredible 1000-amp burst rate. All this power comes in a sleek black machined aluminum case designed for maximum heat dissipation. This second generation of ESC also features a 32-bit microprocessor for more powerful processing capability and more precise power output. Each ESC comes with our updated high strand count, high flex 13-gauge wire, fan, and capacitor bank. A shortened receiver connector wire comes standard to make sure your wiring looks clean. The MX10 Gen 2 ESC can be programmed by the MX Gen 2 Wireless Module (sold separately) to take your driving to the next level, right from your phone!

Features

  • 200A Current Rating
  • 1000A Burst Current Rating
  • Adjustable 6.0v/7.4v BEC
  • 2-Pole 3.5T Motor Limit
  • Low voltage cut-off, over-heat, and throttle signal loss protection
  • Proprietary proportional boost and turbo functionality
  • Enhanced throttle response, excellent acceleration, linearity, and drivability
  • Data logging for real-time maximum ESC temperature, motor RPM, Voltage and more
  • 32-bit microprocessor for more powerful processing capability and more accurate motor output
  • Includes updated high strand count, high flex black 13-gauge wire
  • Lightweight heat sink design, with highly efficient heat dissipation system and 30mm fan
  • Built-in power button
  • Programmable using the MX Gen 2 Wireless Module (TEP0015, sold separately) and Trinity Programming App

Please Note:

  • 2S-3S Use Only!
  • Not Recommended for Drag Applications
  • Warranty is void if used in Drag Application
  • Warranty is void if original motor wires are changed or RX wire is altered in any way

Product Specs

Product Length
1.63" (41 mm)
Adjustable Timing
Yes
Maximum Burst Current
1000A
Maximum Continuous Current
200A
Motor Type
Brushless
Reverse
Yes
Wire Gauge
13 AWG
Product Width
1.45" (37 mm)
BEC Type
Adjustable
Auto Cutoff
Yes
Low-Voltage Cutoff Programmable
Yes
Overload Protection
Yes
Product Weight
102g
Water-Resistant
No
BEC
Yes
BEC Voltage
6.0v / 7.4v
Input Voltage
2-3S LiPo / 5-10S NiMH
Motor Limit
2-Pole 3.5T
Product Height
0.82" (21 mm)
Sensored
Yes
Programmable
Yes