
HS-755MG Giant Scale Analog Metal Gear Servo
Item No.
HRC32755S

HS-755MG Giant Scale Analog Metal Gear Servo
Item No.
HRC32755S
$45.99
Earn points on this item
ⓘ
Selected Store
Product Details
Key Features
- Metal geared
- Dual ball bearing output spline
- Water and dust tight
- Designed for use in large models
In The Box
- One HS-755MG giant dual BB servo with Hitec/JR/Z tupe connector
- One servo accessory package containing: One 1" (26mm) single arm servo horn(pre-installed on servo) One 1.3" (33mm) single arm servo horn One 2.3" (58mm) dual arm servo horn One 1.7" (43mm) diameter servo wheel One 2.8" (71mm) dual arm servo horn
- Four brass eyelets
- Four servo mounting screws
- Four rubber grommets
- Length: 2.32" (59mm) Width: 1.14" (29mm) Height: 1.96" (50mm) Weight: 4.12oz (117g) Speed: .28 sec/60° @ 4.8V, .23 sec/60° @ 6V Torque: 166.64 oz in (12kg.cm) @ 4.8V, 199.97 oz in (14.4kg.cm) @ 6V
Quick Links
Manuals & SupportKey Features
- Dual Ball-Bearings
- Water and dust resistant case
Overview
The HS-755MG “giant scale” servo is offered with either the revolutionary Karbonite gears (HRC33755S) or metal gears. Both are perfect for larger R/C applications and feature dual ball bearings with a water and dust resistant case. The powerful HS-755MG delivers a whopping 200 oz-in of torque at 6 volts.
Detailed Information
Product Specifications
Specs
Speed | 0.28 sec/60 deg @ 4.8V; 0.23 sec/60 deg @ 6V at no load |
Torque | 166.6 oz-in (12.0kg-cm) @ 4.8V; 200.0 oz-in (14.4kg-cm) @ 6V |
Current Draw Idle | 8mA |
Current Draw Stall | 1500mA @ 4.8V; 1800mA @ 6.0V |
Deadband | 5 microsecond |
Bushing Or Bearing | Bearing |
Maximum Servo Speed | 0.200+ sec |
Gear Type | Metal |
Motor Type | 3-pole |
Maximum Servo Torque | 200-349 oz-in |
Servo Size Category | Standard Large and Giant Scale |
Servo Operating Voltage | 4.8 - 6.0V |
Programmable | No |
Bearing | Dual |
Servo Type | Analog |