In Stock

DLE-170 170cc Twin Gas Engine with Electronic Ignition and Mufflers
Item No.
DLE Engines -
DLEG0170
$1,199.99
In Stock

DLE-170 170cc Twin Gas Engine with Electronic Ignition and Mufflers
Item No.
DLE Engines -
DLEG0170
$1,199.99
- Horizontally opposed twin cylinders for low vibration operation
- Special aluminum alloy crankcase
- Electronic ignition for simpler starts, higher performance and minimal RF noise **Ignition Sensor available separately**
- Sealed ball bearings
- Double V-type reed valves, bottom induction
DLE-170 170cc Twin Gas Engine with Electronic Ignition and Mufflers
Item No.
DLE Engines -
DLEG0170
Product
$1,199.99
Add Ons
Estimated Total:
$1,199.99
Earn points on this item
ⓘ
Selected Store
Product Details
In The Box
- (1) DLE-170cc Gasoline Engine
- (2) Mufflers with Gaskets and Mounting Hardware
- (2) Spark Plugs
- (1) Electronic Ignition
- (1) Mount
- (1) Throttle Arm Extension
- (4) Machined Aluminum Standoffs
- (1) Mounting Template
- (1) Product manual
Needed to Complete
- 87 octane gasoline
- 2-cycle oil, mix ratio for this engine is 30 parts gas to one part oil and must be followed exactly for warranty consideration and optimum performance
- Ignition Battery: Two 4.8 - 6V NiCd or NiMH batteries OR 7.4V LiPo Packs (separate receiver style pack can be used)
- NOTE, 1st version ignition is marked 'A-01' on the label and requires a regulator if using 2S LiPo/LiFe battery If ignition module is the A-02 model it has a built-in voltage regulator. Model A-02 designation is located above the word "Ignition" on top of the case
- Propeller: 30x12 or 32x10
Quick Links
Manuals & SupportPacked with power!
Enjoy plentiful power on demand with the DLE Engines DLE-170cc Twin Gas Engine! Includes advanced CNC machining, an Electronic Ignition Unit, twin mufflers, a customized carburetor and more.
- Special, bearing-equipped aluminum alloy crankcase.
- Advanced CNC machining.
- Horizontally-opposed twin cylinders reduce vibration.
- Simple design allows for a high power-to-weight ratio.
- Automatic electronic ignition.
- Double V-type reed valves, bottom-induction design.
- Includes mount, spark plugs, gaskets, bolts, machined aluminum standoffs, a throttle arm extension and mounting template.
- 2-year limited warranty through Hobby Services* beginning at date of purchase.
*DLE Engines sold by Tower Hobbies, come with a 2 year limited warranty. Service is provided by Hobby Services in Champaign, IL.

Like all DLE engines, the DLE-170 cc is loaded with "extras" which add value instead of cost. The DLE-170 package includes mufflers, spark plugs, a throttle arm extension and a mounting template.

The included Electronic Ignition Unit provides simpler starts, higher performance and reduced noise.
Product Specifications
Bore | 2.06" (52mm) |
Crankshaft Type | Threaded |
Power Type | Gas |
Plug Type | NGK CM6 |
Stroke | 1.19" (30mm) |
Cylinders | Twin |
Product Width | 11.3" (288mm) |
Total Weight | 9.1 lbs (4132 g) |
Product Height | 4.9" (124mm) from center of crankshaft to top of carburetor |
Prop Range | 30 x 12 or 32 x 10 |
Starter Type | Hand Held Starter |
Ignition Weight | 5.64 oz (160g) |
Muffler Weight | 7.05 oz (200g) combined weight |
Muffler Type | 2-piece aluminum |
Engine (Only) Weight | 7.83lbs (3,550g) |
Displacement | 10.37 cu in (170 cc) |
Oil Type & Content | 30:1 2-cycle oil mixture |
Product Length | 9.1" (232mm) from standoff to front of prop hub |