In Stock

D954SW Standard Digital High Torque Steel Gear Servo
Item No.
Hitec RCD Inc. -
HRC36954
$99.99
In Stock

D954SW Standard Digital High Torque Steel Gear Servo
Item No.
Hitec RCD Inc. -
HRC36954
$99.99
The power of Hitec’s D-Series servos continues with the introduction of the next Premium Class trio: the D930SW, D954SW and D955TW. As with the entire “D” line, these technologically-advanced servos are powered by a 32-bit MCU (Microcontroller Unit) and 12-bit ADC (Analog to Digital Converter) industrial science and possess Smart Sense engineering with rapid, high resolution response. Their unprecedented programmability and wide-voltage capabilities deliver the most progressive, leading-edge performance for all your radio control needs. Built with incredibly durable steel gears, the D930SW are the perfect upgrade from our popular HS-7954SH servo. Advancing servo technology and providing superior engineering has always been Hitec’s mission and that continues today as Hitec expands their outstanding D-Series product line.
- Speed: @4.8V .19sec/60' / @7.4V .12sec/60'
- Torque: @4.8V 251oz/in / @7.4V 405oz/in
- Programmable PWM Digital Amplifier
- 32-Bit MCU with 12-Bit ADC Circuitry
- 4096 Resolution
- 1M Cycle Long Life Potentiometer
- Wide Operating Voltage (4.8 ~ 8.4 Volts DC)
- Dual Ball Bearing Supported Output Shaft
- 25-Tooth Output Spline
- Coreless Metal Brush Motors
- Nylon Reinforced Plastic Upper and Lower Case
- Diamond Cut Aluminum Heat Sink Center Case
- Dust Resistant and Splash Proof Case
D954SW Standard Digital High Torque Steel Gear Servo
Item No.
Hitec RCD Inc. -
HRC36954
Product
$99.99
Add Ons
Estimated Total:
$99.99
RC Club points earned on this item shown at checkout.
ⓘ
Selected Store
Product Details
In The Box
- (1) D954SW Standard Digital High Torque Steel Gear Servo

Quick Links
Manuals & SupportHighlights of the D-Series Servos
Product Specifications
Maximum Servo Torque | 251oz/in @ 4.8V, 405oz/in @ 7.4V |
Bearing | Dual Ball Bearing |
Bushing Or Bearing | Bearing |
Gear Type | Metal |
Wire Gauge | 20 AWG |
Current Draw Idle | 30mA |
Product Width | 0.78" (20 mm) |
Current Draw Stall | 5,200mA |
Motor Type | Brushed |
Servo Operating Voltage | 4.8 - 8.4V (HV) |
Product Height | 1.46" (37 mm) |
Servo Type | Digital |
Programmable | Yes |
Servo Size Category | Standard |
Connector Type | Universal |
Maximum Servo Speed | 0.19 sec/60 deg @ 4.8V, 0.12 sec/60 deg @ 7.4V |
Product Length | 1.57" (40 mm) |
Deadband | 1µs |
Input Voltage | 4.8V ~ 7.4V |
Application | 30-40% sport planes, 2 meter+ sailpanes, 30-40% 3D & performance scale aircraft, all 1:8 scale vehicles, 1M & scale sailboats |
Product Weight | 2.40 oz (68g) |
Spline Count | 25 Teeth |
Water-Resistant | No |