In Stock

D845WP Giant Scale Digital Monster Torque Waterproof Steel Gear Servo
Item No.
Hitec RCD Inc. -
HRC36845
$114.99
In Stock

D845WP Giant Scale Digital Monster Torque Waterproof Steel Gear Servo
Item No.
Hitec RCD Inc. -
HRC36845
$114.99
The D845WP servo is a IP-67 rated servo capable of being truly waterproof, dust resistant, and ready for 1/5th-scale Rock Crawlers and Off-Road Trucks. As with our entire “D” line, this technologically-advanced servo is powered by our 32-bit MCU (Microcontroller Unit) and 12-bit ADC (Analog to Digital Converter) industrial science and possess Smart Sense engineering with rapid, high resolution response. The unprecedented programmability and wide-voltage capabilities deliver the most progressive, leading-edge performance for all your radio control needs. With incredibly durable steel gears, dual ball bearing and hardened steel output shaft, the high-end performing D845WP produces the mighty torque and reliability required to take bashers to the next level.
- Speed: @4.8V .26sec/60' / @7.5V .17sec/60'
- Torque: @4.8V 452oz/in / @7.4V 695oz/in
- Programmable PWM Digital Amplifier
- 32-Bit MCU with 12-Bit ADC Circuitry
- 4096 Resolution
- 1M Cycle Long Life Potentiometer
- Wide Operating Voltage (4.8 ~ 8.4 Volts DC)
- Dual Ball Bearing Supported Output Shaft
- 25-Tooth Output Spline
- Coreless Metal Brush Motors
- Nylon Reinforced Plastic Upper and Lower Case
- Diamond Cut Aluminum Heat Sink Center Case
- IPD 67 Rated Water Resistant and Waterproof Proof Case
D845WP Giant Scale Digital Monster Torque Waterproof Steel Gear Servo
Item No.
Hitec RCD Inc. -
HRC36845
Product
$114.99
Add Ons
Estimated Total:
$114.99
RC Club points earned on this item shown at checkout.
ⓘ
Selected Store
Product Details
In The Box
- (1) D845WP Giant Scale Digital Monster Torque Waterproof Steel Gear Servo

Quick Links
Manuals & SupportHighlights of the D-Series Servos
Product Specifications
Programmable | Yes |
Servo Size Category | Giant Scale |
Maximum Servo Torque | 452oz/in @ 4.8V, 695oz/in @ 7.4V |
Bearing | Dual Ball Bearing |
Bushing Or Bearing | Bearing |
Gear Type | Metal |
Wire Gauge | 20 AWG |
Application | Giant Scale Cars |
Product Weight | 8.0 oz (227g) |
Spline Count | 15 - Tooth |
Water-Resistant | Yes |
Current Draw Idle | 30 mA |
Product Width | 1.26" (32 mm) |
Connector Type | Universal |
Maximum Servo Speed | 0.26 sec/60 deg @ 4.8V, 0.17 sec/60 deg @ 7.4V |
Product Length | 2.6" (66 mm) |
Current Draw Stall | 10,000 mA |
Motor Type | Brushed |
Servo Operating Voltage | 4.8 - 8.4V (HV) |
Deadband | 1µs |
Input Voltage | 4.8V ~ 7.4V |
Product Height | 2.44" (62 mm) |
Servo Type | Digital |