Backorder
|
Next Shipment March 2023

D625MW Standard Digital High Speed Metal Gear Servo
Item No.
Hitec RCD Inc. -
HRC36625
$39.99
Backorder
|
Next Shipment March 2023

D625MW Standard Digital High Speed Metal Gear Servo
Item No.
Hitec RCD Inc. -
HRC36625
$39.99
The metal D-625MW is part of Hitec's D-Series servo line. All Hitec D-Series servos have been designed using our brand new, cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility, these servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitec’s industry standard 25-tooth output spline with 3mm hex screw, each D-Series servo brings monster performance never known before in the market.
- Speed: @4.8V .20sec/60' / @6.0V .13sec/60'
- Torque: @4.8V 87oz/in / @6.0V 139oz/in
- Programmable PWM Digital Amplifier
- 32-Bit MCU with 12-Bit ADC Circuitry
- 4096 Resolution
- 1M Cycle Long Life Potentiometer
- Wide Operating Voltage (4.8 ~ 8.4 Volts DC)
- Dual Ball Bearing Supported Output Shaft
- 25-Tooth Output Spline
D625MW Standard Digital High Speed Metal Gear Servo
Item No.
Hitec RCD Inc. -
HRC36625
Product
$39.99
Add Ons
Estimated Total:
$39.99
Earn points on this item
ⓘ
Selected Store
Product Details
In The Box
- (1) D625MW Standard Digital High Speed Metal Gear Servo

Quick Links
Manuals & SupportHighlights of the D-Series Servos
Product Specifications
Deadband | 2µs |
Input Voltage | 4.8V ~ 6.0V ~ 7.4V |
Product Height | 1.48" (38 mm) |
Servo Type | Digital |
Connector Type | Universal |
Product Length | 1.59" (40 mm) |
Maximum Servo Speed | 0.20 sec/60 deg 4.8V, 0.15 sec/60 deg @ 6.0V, 0.13 sec/60 deg @ 6.0V |
Application | Sport Aircraft, Helicopters, Cars |
Product Weight | 2.11oz (57g) |
Spline Count | 25 - Tooth |
Water-Resistant | No |
Current Draw Idle | 30 mA |
Product Width | 0.77" (20 mm) |
Bearing | Dual Ball Bearing |
Bushing Or Bearing | Bearing |
Gear Type | Metal |
Wire Gauge | 22 AWG |
Current Draw Stall | 2,650 mA |
Motor Type | Brushed |
Servo Operating Voltage | 4.8 - 7.4V (HV) |
Programmable | Yes |
Servo Size Category | Standard |
Maximum Servo Torque | 87oz/in @ 4.8V, 122oz/in @ 6.0V, 139oz/in @ 7.4V |