Free Shipping On Orders Over $99 Learn More
Shop Local
|
Contact Us
|
RC Blog
|
RC Club
Complete your product
This product may require additional items in order to work out of the box. See below for required items that may be needed to complete.
I do not need to purchase this item.
I do not need to purchase this item.
I do not need to purchase this item.
I do not need to purchase this item.
The new Team Losi Racing® 8IGHT-XT/XTE Next Generation Truggy builds on the championship-winning heritage of its predecessors with updates to the suspension geometry and drivetrain as well as the chassis layout that make it both easier to drive and tougher to beat. Plus, it includes Nitro and Electric in one box! The 8IGHT-XT/XTE has a combination of features second-to-none including large footprint engine mount, 3mm chassis, cab forward body, machined aluminum shock caps, and so much more. Designed to win straight out of the box, the 8IGHT-XT/XTE expands performance and is ready for the winner's circle.
All of the items to run either nitro or electric included in one box.
The 8IGHT-XT/XTE Next Gen suspension geometry has been completely revamped making a truck that is fast, nimble, and easy to drive. This includes a myriad of updates including wider front pivot with less scrub radius, narrower rear pivot, longer front and rear arms, and updated hub offset.
All new suspension arms have been designed to accept stiffener plates that will allow racers to tune the flex of the suspension. The kit will include molded plates with optional carbon fiber plates available separately.
Chassis width has been increased to aid in stability and give the truggy a more neutral feel as well as equalized side to side for equal torsional flex and thinned down to 3mm for weight savings.
The internal pinion bearing size in the front and rear has been increased for added durability.
Cab forward design helps with overall down force, which improves steering and overall stability.
New chassis side guards that have an improved fit onto the chassis.
Lightweight large footprint engine mount that reduces flex underneath the engine to eliminate chassis fatigue on high traction race surfaces for nitro.
One piece aluminum motor mount that is easy to adjust pinion sizing for electric motors.
17.5 deg caster blocks that allow the height of the spindle to be adjusted.
Machined aluminum shock caps with threaded bleeder holes for easy and consistent bleeding of oil.
The weight has been moved forward in the chassis to provide a better driving balance to the vehicle and less parts needed to carry.
Redesigned steering rack which will allow more ackerman adjustments and an improved servo saver to eliminate bellcrank bind during high loads.
Redesigned machined 7075-T6 aluminum shock towers with updated camber link holes.
The front and rear diff case have been altered to allow easier access to the differentials without removing the bulkheads from the vehicle.
New sway bar system that has adjustable length links to allow better equalization of each side of sway bar as well as collars that keep the sway bars centered.
The center drive shaft angles have been modified so they are equal front to rear allowing for a more 4wd feel to the vehicle.
An updated radio tray now puts the throttle servo near the engine to eliminate additional linkage. The updated radio tray will ensure the throttle servo is rigidly mounted to avoid any flex by floating the servo off of the center differential.
The 8IGHT-X shocks are optimized and lightened to decrease the center of gravity and lower the weight of the car.
The throttle and brake actuator uses ball bearings in order to give a super smooth feel on the throttle.
All four corners of the vehicle have been updated to use large ball bearings and the same bearings.
The wheelbase has been shortened to aid in grip as well as provide more agile handling.
The battery box has been designed so that you can now fit either common LiPo receiver packs or Li-Ion receiver packs.
| Front Track | 15.8" (402mm) |
| Product Width | 16.6" (422 mm) |
| Radio | Sold Separately |
| Ball Bearings | Full set |
| Chassis | 0.12" (3mm ) 7075-T6 hard anodized aluminum |
| Completion Level | Kit |
| Drivetrain | 4WD |
| Drive Type | Forward/Reverse |
| Product Height | 7.3" (185 mm) |
| Power Type | Electric/Nitro |
| Gear Pitch | 1.0 Mod |
| Servos | Sold Separately |
| Final Drive Ratio | 16.6:1 |
| Rear Track | 15.8" (402mm) |
| Speed Control | Sold Separately |
| Wheelbase | 14.7" (373mm) |
| Product Weight | 9.0 |
| Vehicle Type | Truggy |
| Water-Resistant | Yes |
| Approximate Assembly Time | Approximately 3-5 hours |
| Body | Unpainted |
| Brakes | Ball bearing equipped brake actuator |
| Scale | 1/8 |
| Charger | Sold Separately |
| Differential | 3 sealed viscous filled gear diffs |
| Max Battery Dimensions | 5.4 x 1.8 x 1.5" (138 x 47 x 40mm) |
| Receiver | Sold Separately |
| Shock Type | Aluminum body, oil-filled |
| Battery | Sold Separately |
| Engine Size | .21 cu in (3.4cc) sold separately |
| Fuel Tank Capacity | 5.1oz (150cc) |
| Gear Ratio | 4.5:1 |
| Ground Clearance | 1.6" (40mm) |
| Internal Gear Ratio | 4.5:1 |
| Product Length | 21.1" (536 mm) |
| Spur Gear | 48T |
| Suspension | Independent |
| Track Surface | 15.8" (402mm) front and rear |
Horizon Hobby RC Club:
The points displayed are points you will earn based on your membership level and the cost value of the product. Be sure you are Signed In to your account to see the most accurate points you will earn on your purchase.
|
Points per $1 Spent |
Standard |
Legend |
Elite |
|
5 |
15 |
20 |
2000 points = $5 Discount
Points displayed here do not include Bonus Points for select product. If the product is marked with the Bonus Points badge you will also earn the extra "Bonus Points" points listed in the banner in addition to the calculated points displayed
Live Chat
