1/8 8IGHT-T 4X4 Nitro Truggy RTR, Purple/Yellow

Item No.
Losi - LOS04011V2
$519.99
RC Club points earned on this item shown at checkout.
This product requires a compatible battery and charger. Why SMART?
0 Item Selected Items Selected
0 Item Selected Items Selected
Shock Oil, 6Pk, 20, 25, 30, 35, 40, 45, 2oz
Shock Oil, 6Pk, 20, 25, 30, 35, 40, 45, 2oz
TLR74020
LOS04011V2
$32.99
0 Item Selected Items Selected
Metered Glow Driver with 2600mAh Ni-MH & Charger
Metered Glow Driver with 2600mAh Ni-MH & Charger
DYN1922
LOS04011V2
$21.99
0 Item Selected Items Selected
Nitrotane Race Fuel 20%, Quart
Nitrotane Race Fuel 20%, Quart
LOSF0420
LOS04011V2
$16.99
Nitrotane Race Fuel 30%, Quart
Nitrotane Race Fuel 30%, Quart
LOSF0430
LOS04011V2
$22.99
0 Item Selected Items Selected
Selected Store

Overview

If you are serious about becoming a competitive nitro truggy racer, this is the place to start. The Losi® 8IGHT-T Nitro Truggy RTR comes completely assembled and equipped with the brute power of a Dynamite® .28 nitro engine and the precise response that only a Spektrum SLT radio system can provide. You also get the benefit of a pre-set suspension that has the same geometry team drivers use on their 8IGHT-T truggies. As your skills progress and you gain more racing experience, you can gradually upgrade the vehicle's performance with many of the 8IGHT-T option parts currently available.

  • Your fast track to nitro truggy racing
  • 4mm 6061-T6 Aluminum Chassis Plate
  • Dynamite® .28 nitro engine with pull start
  • Metal-gear transmission and sealed differentials
  • Gen III radio tray for longer servo life

Features

  • Your fast track to nitro truggy racing
  • Spektrum SLT 3-Channel SLT Radio System
  • Spektrum SLR300 Surface Receiver
  • Spektrum S614 Waterproof Metal Gear Surface Servo, 23T
  • 4mm 6061-T6 Aluminum Chassis Plate
  • Gen III radio tray for longer servo life
  • Dynamite® .28 nitro engine with pull start
  • Pre-set suspension geometry
  • Metal-gear transmission and sealed differentials
  • Center and rear dogbones
  • 15mm adjustable oil-filled shocks
Heavy-Duty Steering and Gen III Radio Tray
Heavy-Duty Steering and Gen III Radio Tray

The vehicle comes equipped with a Spektrum ultra-torque metal-gear steering servo that maintains superb holding power and precise control on the roughest tracks. A Gen III radio tray prolongs steering and throttle servo life with features like ball-bearing linkages and more accurate linkage alignment. It resists wear and tear from chassis flex, too.

 

Brute Power
Brute Power

A powerful Dynamite .28 nitro engine gives you all the grunt you need to be a front runner, right out of the box. It is equipped with a convenient pull-start so you don't have to buy a starter box to get racing right away.

 

Metal-Gear Drivetrain and Sealed Differentials
Metal-Gear Drivetrain and Sealed Differentials

A metal-gear drivetrain and sealed differentials give the truggy the durability it needs for long heats and rough conditions.

 

Center and Rear Dogbones
Center and Rear Dogbones

These eliminate the friction of a CV coupler and improve bump handling in the rear of the car.

 

Pre-Set Suspension Geometry
Pre-Set Suspension Geometry

The suspension geometry is pre-set from the factory to match that used by professional team drivers so you can hit the track with confidence. And because it uses fixed-length turnbuckles and steering arms, you know it will remain consistent race to race.

 

Product Specs

Approximate Assembly Time
No assembly required
Ball Bearings
Full set
Battery
Included
Body
Painted and screen printed
Brakes
Dual disc
Charger
Sold Separately
Chassis
4mm 6061 T-6 aluminum
Completion Level
Ready-To-Run
Differential
Fluid filled gear type
Drivetrain
4WD
Final Drive Ratio
15.03:1
Fuel Tank Capacity
4.2oz (125cc)
Gear Pitch
1.0 Module
Internal Gear Ratio
3.91:1
Pinion
13T
Power Type
Nitro
Product Height
7.3" (185 mm)
Product Length
18.75" (476 mm)
Product Width
16.38" (416 mm)
Radio
Included
Receiver
Included
Scale
1/8
Servos
Included
Shock Type
Composite body
Spur Gear
50T
Suspension
4-wheel independent
Vehicle Size
Standard
Vehicle Type
Truggy
Wheelbase
14.93" (379 mm)

Video Overview

This thoroughly equipped, RTR nitro truggy is based on the 8IGHT buggy platform that has captured multiple ROAR national titles as well as international wins. It has everything you need to be a contender, right out of the box.

Product Details

icon-box
In The Box
  • (1) 8IGHT 4WD Nitro Truggy RTR
  • (1) Spektrum SLT 3-Channel SLT Radio System
  • (1) Dynamite 1600mAh 6V NiMH receiver pack
  • (4) AA Transmitter Batteries
  • (1) 4-Way Cross Wrench
  • (1) Product Manual
icon-how-to
Needed to Complete
  • (1) 20-30% Nitromethane fuel
  • (1) Nitromethane-Approved Dispenser
  • (1) NiMH Battery Charger with Rx charge lead
  • (1) Glow Igniter
1/8 8IGHT-T 4X4 Nitro Truggy RTR, Purple/Yellow