Discontinued | This Item is No Longer Available
Brand Logo
4.5 out of 5 Customer Rating

1/8 8IGHT-T 4WD Truggy Nitro RTR, Purple/Yellow

Item No.
Losi - LOS04011
Discontinued | This Item is No Longer Available
Brand Logo
4.5 out of 5 Customer Rating

1/8 8IGHT-T 4WD Truggy Nitro RTR, Purple/Yellow

Item No.
Losi - LOS04011
Selected Store
1/8 8IGHT-T 4X4 Nitro Truggy RTR, Purple/Yellow
1/8 8IGHT-T 4X4 Nitro Truggy RTR, Purple/Yellow
View Alternate Product Details

Product Details

Key Features

  • Your fast track to nitro truggy racing
  • 4mm T-6 aluminum chassis plate
  • Spektrum ultra-torque waterproof metal-gear steering servo
  • Gen III radio tray for longer servo life
  • Dynamite® .28 nitro engine with pull start
  • Pre-set suspension geometry
  • Metal-gear transmission and sealed differentials
  • Center and rear dogbones
  • 15mm adjustable oil-filled shocks
  • Spektrum waterproof metal-gear servo
  • Includes Spektrum DX2E DSMR® transmitter
  • Includes Dynamite 1600mAh 6V NiMH receiver pack
Needed to Complete
  • 20-30% Nitromethane fuel
  • Nitromethane-Approved Dispenser
  • NiMH Charger
  • Glow Igniter
What's in the box?
  • (1) 8IGHT-T 4WD Nitro Truggy RTR
  • (1) DX2E Transmitter
  • (4) AA Batteries
  • (1) Dynamite 1600mAh 6V NiMH receiver pack
  • (1) 4-Way Cross Wrench
  • (1) Bind Plug
  • (1) User Manual


If you are serious about becoming a competitive nitro truggy racer, this is the place to start. The Losi® 8IGHT-T Nitro Truggy RTR comes completely assembled and equipped with the brute power of a Dynamite® .28 nitro engine and the precise response that only a Spektrum DSMR® radio system can provide. You also get the benefit of a pre-set suspension that shares the same geometry team drivers use on their 8IGHT-T truggies. As your skills progress and you gain more racing experience, you can gradually upgrade the vehicle's performance with many of the 8IGHT-T option parts currently available.

Heavy-Duty Steering and Gen III Radio Tray

The vehicle comes equipped with a Spektrum™ ultra-torque metal-gear steering servo that maintains superb holding power and precise control on the roughest tracks. A Gen III radio tray prolongs steering and throttle servo life with features like ball-bearing linkages and more accurate linkage alignment. It resists wear and tear from chassis flex, too.

Brute Power

A powerful Dynamite .28 nitro engine gives you all the grunt you need to be a front runner, right out of the box. It is equipped with a convenient pull-start so you don't have to buy a starter box to get racing right away.

Metal-Gear Drivetrain and Sealed Differentials

A metal-gear transmission and sealed differentials give the truggy all the durability it needs for long mains and rough conditions.

Center and Rear Dogbones

These eliminate the friction of a CV coupler and improve bump handling in the rear of the car.

Pre-Set Suspension Geometry

The suspension geometry is pre-set from the factory to match that used by professional team drivers so you can hit the track with confidence. And because it uses fixed-length turnbuckles and steering arms, you know it will remain consistent race to race.

Product Specifications

Power Type Nitro
Gear Pitch 1.0 Module
Servos Included
Tire Tread XTT
Vehicle Type Truggy
Ball Bearings Full Precision Ball Bearings
Chassis 4mm Plate, Aluminum
Completion Level Ready-To-Run
Drivetrain 4WD
Product Height 7.30 in (185.5mm)
Fuel Tank Capacity 125cc (4.2 Oz)
Internal Gear Ratio 3.91:1
Product Length 18.75 in (476mm)
Spur Gear 50T
Suspension 4-wheel Independent
Approximate Assembly Time No assembly required
Body Painted/Screened
Brakes Dual Disc
Pinion 13T
Scale 1/8
Product Width 16.38 in (416.1mm)
Radio Included
Final Drive Ratio 15.03:1
Wheelbase 14.93-15.09 in (379-383mm)
Differential Fluid Gear Diff
Receiver Included
Shock Type 15mm bore, Composite
Wheel Type Racing Dish