Command a storm of power!
Whether you like driving forward or sideways, the Lightning EPX Drift can deliver. Drifting is a style of driving where the line between control and chaos is continually challenged. A combination of 27T 540 brushed motor and special RC drift tires allow the Lightning EPX Drift to slide effortlessly around corners, while maintaining a steady forward momentum. Shaft driven 4WD helps maintain control while drifting and the lightweight plastic chassis makes recovery easy. A forward and reverse ESC allow the Lightning EPX Drift to back out trouble so the drifting fun can continue. A 2.4GHz radio system provides reliable control for maneuvering multiple corners in a matter of seconds. Aluminum capped oil filled shocks and adjustable independent suspension allow drivers to tune the car to their liking. Ready to run, the Lightning EPX Drift comes complete with rechargeable battery pack and charger. Quit driving inside the lines and use the whole road with the Lightning EPX Drift!
- Fully loaded and ready to go 1/10 scale road racer
- Full time four wheel drive
- Powerful, interference free 2.4GHz transmitter
- Powerful, 27T 540 motor
- Onroad race tires
- Aluminum body, oil-filled shocks
- Adjustable independent suspension
- 7.2v 2000mAh NiMh battery & Charger Included
- AA Batteries x 8 for Transmitter
- (1) Assembled Lightning EPX On-Road Drift Car with:
- (1) Painted, trimmed dody
- (1) Brushed Motor
- (1) 2.4GHz Radio System
- (1) 7.2V NiMH Battery
- (1) NiMH Wall Charger
- (1) Product Manual
Aluminum-capped, oil-filled shocks provide a smooth ride every time.
powerful motor propels all four tires to maximum velocity while the included 7.2v 2000mAh NiMh battery pounds out consistent power.
Designed with rugged durability and weight distribution in mind.
With aggressive looks and powerful gear, the Lightning EPX is ready to streak down the street!
|Wheel Type||5 Star, Plastic Construction|
|Wheel Width||1.02" (26mm)|
|Servos||One for steering|
|Product Length||14.2" (360mm)|
|Product Width||7.9" (200mm)|
|Product Height||4.4" (112mm)|
|Outer Diameter||2.5 in (65mm)|
|Gear Pitch||0.6 Module|
|Ground Clearance||0.20" (4.5mm)|
|Internal Gear Ratio||1:6.52|
|Motor Size||540 brushed, 19T|
|Differential||Bevel Gear, Ball Bearing Equipped|
|Approximate Assembly Time||No assembly required|
|Ball Bearings||Transmission and Diff Only|
|Battery||7.2V 6-cell NiMH 2000mAh Stick Pack w/4.0 Banana Connector|
|Battery Tray Dimensions||5.2 x 1.8 x 0.9" (132 x 45 x 23mm)|
|Body||Trimmed and Painted L, W, H, 17 x 8.1 x 4.2" (360 x 112 x 200mm)|
|Brakes||Integral with ESC|