Brand Logo
5 out of 5 Customer Rating

1/10 DR10 2WD Drag Race Car Brushless RTR, Orange

Item No. ASC70025
Brand Logo
5 out of 5 Customer Rating

1/10 DR10 2WD Drag Race Car Brushless RTR, Orange

Item No. ASC70025
Free financing available through Easy Pay
Earn points on this item
In Stock
Selected Store

Product Details


  • Based on the 9-time R.O.A.R. National Champion short-course race truck platform
  • 2.4GHz 2-channel radio with new DVC (Dynamic Vehicle Control) receiver featuring built-in adjustable gyro
  • Three-position wheelie bar with optional large wheels
  • High-torque, metal-gear Reedy servo with spring style servo saver
  • Powerful Reedy 3300kV brushless motor
  • Reedy 3300kV brushless motor
  • Lightweight front drag tires
  • Durable and lightweight aluminum top shaft
  • Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate both NiMH and 2/3S LiPo battery packs
  • Metric hardware throughout
  • 18 precision, rubber-sealed ball bearings
  • Durable front and rear wide body mounts
  • 2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable slipper clutch
  • Adjustable suspension geometry
  • Vertical ball ends for roll center adjustments, front and rear
  • Many Factory Team options already available!


Modern street racing's roots go back to Woodward Avenue, Michigan in the 1960s when the three main Detroit-based American car companies were producing high-powered performance cars. A private racing venue was not always available, and therefore the race would be held illegally on public roads.

The DR10 Drag Race Car is based on the 9-time R.O.A.R. Short Course National Championship winning trucks. The DR10 features a water-resistant high-power Reedy brushless speed control and 3300kV brushless motor, a 2.4GHz 2-channel radio system, as well as the ALL NEW DVC (Dynamic Vehicle Control) receiver unit with built-in adjustable digital gyro. Add to that a Reedy metal-gear, digital, high-torque servo and a water-resistant enclosed receiver box.

Needed to Complete
  • Four (4) AA batteries (#ASC302 Reedy AA Alkaline) used in the transmitter
  • NiMH or LiPo battery with High Current T-Plug (#ASC724 Reedy 7-cell WolfPack or #ASC751 Reedy WolfPack LiPo)
  • Charger for battery used (#ASC27201 Reedy balance Charger - good for LiPo, LiFe)
What's in the Box?
  • (1) DR10 Drag Race Car RTR
  • (1) 2.4GHz 2-channel radio
  • (1) High-torque, metal-gear Reedy servo
  • (1) Reedy Brushless Speed Control
  • (1) Product Manual

Video Overview


Factory-finished Body

Factory-finished two-piece Reakt drag race body with rear spoiler


Reedy Speed Control

Water-resistant high-power Reedy brushless speed control with T-plug connector and LiPo


Coil-over Shocks

Aluminum 12mm big bore coil-over shock absorbers


Wheelie Bar

Three-position wheelie bar with optional large wheels



Rugged steel turnbuckles for adjustable camber and front toe-in


Receiver Box

Water-resistant enclosed receiver box


CVA Driveshafts

Rear CVA driveshafts for more reliability


Drag Race-inspired Wheels

Lightweight drag race-inspired wheels with high-grip rear drag slick tires


Product Specifications

Approximate Assembly Time No assembly required
Ball Bearings 18 precision, rubber-sealed ball bearings
Battery Tray Dimensions L, W, H: 5.5 x 1.8 x 0.96" (139 x 47 x 24.5mm)
Charger Sold Separately
Chassis Low center-of-gravity molded composite
Completion Level Ready-To-Run
Drivetrain 2WD
Power Type Electric
Internal Gear Ratio 2.6:1
Motor Type Brushless
Product Length 24" (609.6mm)
Product Weight 10.70" (272mm)
Product Width 10.7" (272mm)
Radio Included
Receiver Included
Scale 1/10
Shock Type Aluminum 12mm big bore coil-over
Speed Control Included
Suspension Adjustable suspension geometry
Tire Tread Slick
Vehicle Type Drag Car
Water-Resistant Yes
Wheelbase 12.68" (322mm)