Discontinued | This Item is No Longer Available

1/8 Yeti XL 4WD RTR

Item No.
Axial - AXID9032
Selected Store
Needed to Complete
  • Two 2S or 3S LiPo Packs with Dean's Ultra connector, 25C minimum discharge rating
  • Suitable Charger
  • AA Batteries: Four for transmitter
  • LiPo charge bag, maintenance and trail equipment
What's in the box?
  • (1) RTR Yeti XL Monster Buggy with Radio System, ESC, Motor, Body, 4-Way Wrench
  • (1) User Manual

Specifications

    Vehicle

  • Length: 25.75" (654mm)
  • Width: 16.3" (414mm)
  • Height: 11.10" (282mm)
  • Wheelbase: 18.5" (470mm)
  • Ground Clearance: 2.48" (63mm)
  • Weight: 12.75" (5.78kg)
  • Body

  • Length: 23.5" (597mm)
  • Width: 9.7" (247mm)
  • Height: 6.8" (173mm)
  • Thickness: .040" (1.02mm)
  • Battery Tray Dimensions

  • Length: 6.89in(175mm)
  • Height: 1.3in (33mm)
  • Width: 1.7in (43mm)
  • Battery Tray Size: 175mm(L)x48mm(W)x30mm(H)

Key Features

  • Chassis: Composite plastic with integrated upper and lower aluminum braces for greater stiffness, multiple upper link positions to adjust anti-squat
  • Drive: Four wheel shaft, AR60XL solid rear axle, WB XL CVJ rear driveshaft with captured cross pin design-no set screws to lose
  • Brushless Motor: Castle Creations 2200Kv, 4-pole
  • Receiver Box: Waterproof, integrated into bottom of chassis
  • Battery Trays: Two, easily accessible from sides of chassis
  • Radio: Tactic TTX300 2.4GHz FHSS spread spectrum 3-channel pistol grip with steering rate, and steering and throttle end point adjustments
  • Steering Servo: Tactic TSX45 metal gear, high-torque, water resistant Electronic Speed Control: Vanguard AE-4 XL 6S/4S LiPo compatible can be programmed manually via Castle Field Programming Card or the or through the Castle Link software interface (optional)
  • Shocks: Oil-filled 16mm Big Bore, 20mm aluminum bodies, 4mm shafts
  • Transmission: All metal gears, single speed, full ball bearing equipped
  • Differentials: CNC cut metal gears
  • Steering: Dual shear rack
  • Suspension: Front, independent, rear 4-link
  • Wheels: Officially licensed Raceline Monster wheels, 3.8" (96mm) diameter
  • Tires: BF Goodrich Krawler T/A KX 2.9 x 7.25" (74 x 184mm)
  • Body:Trimmed and painted, polycarbonate interior tray with molded driver and passenger figures, dashboard and center console detail

Product Specs

Completion Level
Ready-To-Run
Drivetrain
4WD
Motor Size
2200Kv
Motor Type
Brushless
Power Type
Electric
Scale
1/8
Vehicle Type
Buggy