Making use of the telemetry functions in your DSMR® transmitter is easy with the SR6000T receiver. It comes equipped with a built-in telemetry module as well as data ports for voltage, temperature and RPM sensors.
LED 'hold' indicator to help you optimize receiver location
XBus port for additional sensors
Compatible with the DX6R and DX4R PRO (Firmware 1.05 and Higher)
Comes with temp and voltage sensors
Needed To Complete
Telemetry capable DSMR® transmitter
Making use of the telemetry functions in your DSMR® transmitter is easy with the SR6000T receiver. It comes equipped with a built-in telemetry module as well as data ports for voltage, temperature and RPM sensors. An XBus connection for additional sensors is also available.
The SR6000T is built around proven DSMR® technology that provides exceptional range and signal security in noisy 2.4GHz environments.
BEC stands for Battery Eliminator Circuit. It takes 7.2v-8.4v commonly used for electric RC and regulates it to 5.0v which allows the receiver to operate properly without the need for a separate battery pack.
After hard landings or crashes the receivers ceramic filter or tuning coil(s) can become vibration sensitive. Other sources of interference can be RF noise generated by bad bearings in the engine, electronic ignition systems, loose screws, or other metal to metal contact in your R/C application.
Product Support Tips
Technical questions about this Spektrum product should be directed to Horizon Hobby's Product Support Department:
Horizon Hobby, LLC. ATTN: Product Support 2904 Research Road Champaign, IL 61822
To place a Horizon Hobby Support Inquiry please visit our Inquiry FormSupport Phone:(877) 504-0233 Fax:(217) 355-1552
If you would like to purchase this product, please go to the Store Locator or contact the Horizon Hobby Consumer Sales Department:
Horizon Hobby, LLC. ATTN: Consumer Sales 2904 Research Road Champaign, IL 61822 Email: email@example.comSales Phone:(800) 338-4639 Fax:(217) 355-1552