No sacrifice in suspension up travel or performance
More durable than traditional shock boots
Easier installation of spring and perch versus traditional shock boots
The captured design of these shock boots will result in fewer ripped or torn boots while providing superior protection from dirt and debris. They will keep your suspension system free and consistent without sacrificing any suspension up travel. They are a perfect length fit for their respective shock lengths and won't be caught or pinched in between the spring perch and rod end during installation. The boots require the locking spring perches and rod ends (TKR6140) and should be installed before attaching the shock rod end to the shock shaft.
Available in 3 different shock lengths (measured shock cap center to pivot ball center):
107mm: (SCT410/SCT410.3/EB48/EB48.2/EB48SL/NB48 front shock)
122mm: (SCT410/SCT410.3/EB48/EB48.2/EB48SL/NB48 rear shock, ET48/NT48/EB48.3/NB48.3 front shock)
137mm: (ET48/NT48/EB48.3/NB48.3 rear shock)
Note: Requires locking spring perches and rod ends (TKR6140).