When JR started designing the XG11, the aim was to provide top pilots with what they needed in a radio. Numerous functional enhancements and user-friendly features ensured a radio suited to any pilot from beginner to expert. A new-generation, long-life Li-Fe battery is used, which contributes to a large reduction in transmitter weight. The charging control circuit is built into the transmitter. Using an automatic safety system, “Model Link Bind,” the receiver will not operate if the correct model has not been selected in the transmitter before flight.
Dual Modulation Spectrum System (DMSS)* 2.4GHz protocol offers a secure radio link that combines DSSS and FHSS capabilities into a wideband transmission system and includes high-speed response and high resistance against RF noise. One benefit of DMSS is the JR® Intelligent Output System (IOS), which automatically selects control signals that need to be transmitted at exactly the same time and delivers the data as one complete signal frame. IOS ensures there is no time delay when commanding servos used for critical functions, such as a CCPM swashplate on a helicopter, or when operating a wing control surface with multiple servos.
Another feature of DMSS is its bi-directional communication that supplies telemetry information. Receiver voltage telemetry is built in as standard in every DMSS receiver, and add-on sensors will give you real time feedback of information from your model, such as the RPM of an aircraft propeller or helicopter rotor blades, temperature and variometer/altimeter readings.
The XG11 transmitter has a number of exciting new features, such as the Balance function, which equalizes individual servo travel on multi-servo control surfaces. With five adjustable points, servos can be matched not only at the center but across the entire throw of the surface. The XG11 also boasts three programmable stick position switches for mixing and an expanded Dual Rate/Expo menu that allows for up to six additional rate switches. The Trim Input function can allocate trim levers to change numerical values of various functions (such as program mix values) during flight. Also, the revolutionary JR Touch Select function is incorporated, which enables automatic switch selection for programmed functions with just the simple movement of the switch you want to use. No matter what kind of airplane, helicopter or glider you fly, the XG11 is designed to enhance your control and deliver an evolutionary level of precision that is genuine JR.
Standard XG11 System includes: • RG1131B 11-ch DMSS 2.4GHz receiver • RA01T remote antenna/telemetry module • Li-Fe 6.4V 1400mAh 2S transmitter battery pack • NEC-A912 JR 9.0V power adapter • Bind plug
*DMSS technology is not compatible with JR DSM® or Spektrum™ DSM2® or DSMX® equipment.
The AMA (Academy of Model Aeronautics) has certified its use at all AMA fields and events when used as per the manufacturer's instructions. In fact, most event directors welcome Spektrum, as it eliminates the issues of frequency management.
DSM or Digital Spectrum Modulation is Spektrum's proprietary method of implementing 2.4GHz spread spectrum technology for the R/C industry. DSM divides the 2.4GHz band into 80 individual channels (frequencies) and incorporates direct sequence spread spectrum with an embedded GUID (Globally Unique Identifier) code. DSM has been painstakingly optimized by our engineers for RC surface and aircraft use, offering the most robust RF link in the industry.
A Natural Evolution
Spektrum launched the 2.4GHz RC revolution. Since then millions of hobbyists the world over have come to embrace 2.4GHz technology as the way to race and fly. Spektrum leads the way yet again with DSMX™; the world's first wideband, frequency-agile 2.4GHz signal protocol and the most advanced spread spectrum RC technology to date.
DSMX is a natural evolution of DSM2™ technology that is the result of several years of development. It builds on what has come before and takes DSM to the next level of robustness, reliability and efficiency without leaving current DSM2 users behind.
What DSMX™ adds to the tried and true wideband technology of DSM2™ is the extra interference protection and faster reconnection times of frequency agility. But DSMX isn't just another frequency hopping system. It’s wideband agile.
DSMX frequency shifts are coordinated using the most advanced FHSS algorithm ever seen in an RC application. Unlike other FHSS transmitters that all hop in the same fixed patterns, every DSMX transmitter has its own unique frequency shift pattern calculated using its GUID (Globally Unique Identifier). And each pattern uses just 23 channels in the 2.4GHz spectrum.
By adding the agility of unique frequency shifts to the superior interference resistance of a wideband signal, and limiting those shifts to a smaller portion of the 2.4 band, DSMX transmitters provide on-channel interference protection that is simply second to none. The result is quicker reconnection times and superb response in the noisiest 2.4GHz environment.
The foundation DSMX is built on is the same foundation as DSM2™ - the superior on-channel interference resistance and coding gain of wideband DSSS. Compared to the wideband signal of a DSM2 or DSMX™ system, the narrow-band signal of other 2.4 transmitters is more likely to suffer crucial data loss in the event of on-channel interference. Think of wideband 2.4 as a river and narrow-band 2.4 as a stream. It takes much more interference to stop a river than it does to stop a stream.
The big reason wideband is so robust is coding gain. Essentially what this means is that the unique coding in a DSM2 or DSMX wideband signal allows it to be heard well above the noise of surrounding 2.4GHz signals without requiring any more power. In fact, a Spektrum wideband signal can achieve as much as 3X the range of its narrow-band competition using the same amount of power.
Yes. DSM2 transmitters are forward compatible with DSMX receivers and DSMX transmitters are backward compatible with DSM2 receivers. And because DSM2 and DSMX share the same wideband DSSS foundation, all Spektrum users will enjoy superior range, speed and precision whether they're using DSM2 equipment, DSMX equipment or a combination of both.
Yes, but DSM2 users who rarely, if ever, fly in big events or other "noisy" 2.4GHz environments may find the DSM2 equipment they have now is all they will ever need. The difference DSMX makes is only apparent when hundreds of 2.4GHz systems are in use at once. To see if your transmitter is eligible for the DSMX add-on, please visit horizonhobby.com, click on the “radios” tab, and select “DSMX addons” for more details.
Spektrum AirWare™ software was developed exclusively by Spektrum from the ground up. This software includes all the programming functions an expert pilot could want, but you don't have to be an expert to use them. It also brings several unique benefits to Spektrum programmable transmitters that simply aren't available on other systems.
The Spektrum™ Data Interface (SDI) is designed for use with standard SD memory cards and adds a whole new level of flexibility and ease-of-use. With the SDI, you will be able to:
Share setups with others who use the same radio as yours or transfer setups from your SD card to your PC and attach them to an e-mail. This makes it easy to gain from the experience of others or help others succeed. With the SDI, memory for thousands of models could be stored on the SD card or transferred to a PC hard drive for backup. And you can stay up to date with SDI, you won't have to send your Spektrum radio into a service center to get the latest Spektrum AirWare™ enhancements. You can download them onto your SD card and upload them to the transmitter yourself.
Yes. DSMX will provide users with these and the many other exclusive Spektrum advantages they already enjoy with DSM2.
The Spektrum™ X-Plus™ 8 module lets you add 8 fully proportional channels to specially equipped Spektrum transmitters and receivers with 10 or more proportional channels. Just plug it into the X-Plus port of a compatible receiver. It is ideal for scale modelers who like to push realism to the extreme with working accessories and lights in addition to the regular control functions. The DX10t and DX18 offer X-Plus.
Spektrum park flyer receivers are designed for small models up to 2 pounds. Spektrum full range receivers are designed to handle any normal RC conditions. You should have no problem maintaining control as long as you maintain direct line-of-sight with your model. If you try to fly behind a group of trees or otherwise obstruct your direct line-of-sight, you could be susceptible to losing your control link.
Technical questions about this JR product should be directed to JR AMERICAS Support Department:
Horizon Hobby, LLC no longer provides service for JR products. For service needs please contact JR AMERICAS at 217-352-7959 or by email at firstname.lastname@example.org
If you would like to purchase this product, please go to the Store Locator or contact the Horizon Hobby Consumer Sales Department:
Horizon Hobby, LLC. ATTN: Consumer Sales 4105 Fieldstone Road Champaign, IL 61822 Email: email@example.com Sales Phone:(800) 338-4639 Fax:(217) 355-1552
Stay in the Know: Sign up to join our Mailing List
Copyright © Horizon Hobby