Discontinued
Brand Logo
4.6 out of 5 Customer Rating

Yeti XL 4WD Kit

Item No. AXIC9038
Discontinued
Brand Logo
4.6 out of 5 Customer Rating

Yeti XL 4WD Kit

Item No. AXIC9038
This Item is No Longer Available
Selected Store

Product Details

Key Features

  • Chassis: Composite plastic with integrated upper and lower aluminum braces for greater stiffness, multiple upper link positions to adjust anti-squat
  • Drive: Four wheel shaft, AR60XL OCP solid rear axle, WB XL CVJ rear driveshaft with captured cross pin design-no set screws to lose front CVJ metal universals, adjustable steel turnbuckles
  • Shocks: Icon Vehicle Dynamics threaded aluminum Big Bore 16, dual rate springs
  • Steering: Dual shear rack
  • Transmission: All metal gears, full ball bearings, single speed with high gear installed
  • Slipper Clutch: Dual slipper design with aluminum pad on each side of 32P spur gear for right amount of slip, and heat resistance
  • Roll Cage: Y-480 flexible plastic, resembles welded steel tubes
  • Receiver Box: Waterproof, with three silicone seals (electronics not included)
  • Weight Box: Black plastic, styled to resemble a scale fuel cell, may be used as an additional electronics box
  • Tires: Oficially licensed 3.8" (96mm) Falken WildPeak M/T S30 compound
  • Wheels: Officially licensed Raceline Monster wheels, 3.8" (96mm) diameter, 17mm hexes
  • Front Suspension: Independent, maintains high-speed stability and travel direction when encountering the roughest of terrain
  • Rear Suspension: 4-linked Long travel sway bar (medium 3.4mm), 3mm aluminum lower link plates
  • Body: Clear polycarbonate .040" (1mm) thick, with interior tray, three driver helmets, decals, spare wheel and tire

Video Overview

Needed to Complete
  • 2-channel radio
  • Metal gear, high-torque steering servo
  • 1/8 scale brushless 4-pole Power System
  • Two 2S or 3S LiPo Packs with connector to match ESC, 25C minimum discharge rating
  • Suitable Charger
  • Four AA Batteries for Transmitter
  • LiPo charge bag, maintenance and trail equipment
What's in the box?
  • (1) 4WD Yeti XL Rock Racer Kit with Body, Tires, Wheels, Shocks, Decals 3 Driver Helmets, Interior Tray, Spare Wheel and Tire
  • (1) User Manual

Specifications

    Vehicle
  • Length: 18.1" (460mm)
  • Width: 8.8" (225mm)
  • Height: 9.0" (229mm)
  • Wheelbase: 12.0" (305mm), optional link kit allows wheelbase adjustment to either a 11.4" 12.0" or 12.3" wheelbase
  • Ground Clearance: 2.7" (68mm)
  • Weight: 4.65lbs (2.1kg) approximately, with electronics
  • Optimized Gear Ratio: 3.75:1
  • Final Drive Ratio (FDR): 42.00, stock (33.69-54.15 with different spur/pinion gear combinations, extra spur and pinion gears must be purchased separately)
  • Adjustable Battery Tray Dimensions: 5.75 x 1.2" (147 x 32mm)
    Body
  • Length: 17.5" (444mm)
  • Width: 6.25" (159mm)
  • Height: 6.4" (162mm) bottom of body to top of roll cage 3.3" (84mm) bottom of body to top of driver's door

Product Specifications

Specs

Body Clear
Completion Level Kit
Drivetrain 4WD
Power Type Electric
Gear Pitch 32-Pitch
Ground Clearance 2.48 in (63mm)
Inner Tire / Outer Wheel Diameter 3.8 in (96mm)
Product Height 11.1 in (282mm)
Product Length 25.8 in (654mm)
Product Weight 12.75 lb (5.78 kg)
Product Width 16.3 in (414mm)
Scale 1/8
Shock Type Aluminum
Vehicle Type Buggy
Water-Resistant Yes
Wheelbase 18.5 in (470mm)
Wheel Hex Size 17mm