Discontinued
|
This Item is No Longer Available
1/8 8IGHT-T 4WD Truggy Nitro RTR, Purple/Yellow
Item No.
Losi -
LOS04011
Selected Store
1/8 8IGHT-T 4X4 Nitro Truggy RTR, Purple/Yellow
LOS04011V2
Needed to Complete
- 20-30% Nitromethane fuel
- Nitromethane-Approved Dispenser
- NiMH Charger
- Glow Igniter
What's in the box?
- (1) 8IGHT-T 4WD Nitro Truggy RTR
- (1) DX2E Transmitter
- (4) AA Batteries
- (1) Dynamite 1600mAh 6V NiMH receiver pack
- (1) 4-Way Cross Wrench
- (1) Bind Plug
- (1) User Manual
Overview
If you are serious about becoming a competitive nitro truggy racer, this is the place to start. The Losi® 8IGHT-T Nitro Truggy RTR comes completely assembled and equipped with the brute power of a Dynamite® .28 nitro engine and the precise response that only a Spektrum™ DSMR® radio system can provide. You also get the benefit of a pre-set suspension that shares the same geometry team drivers use on their 8IGHT-T truggies. As your skills progress and you gain more racing experience, you can gradually upgrade the vehicle's performance with many of the 8IGHT-T option parts currently available.
Heavy-Duty Steering and Gen III Radio Tray
The vehicle comes equipped with a Spektrum™ ultra-torque metal-gear steering servo that maintains superb holding power and precise control on the roughest tracks. A Gen III radio tray prolongs steering and throttle servo life with features like ball-bearing linkages and more accurate linkage alignment. It resists wear and tear from chassis flex, too.
Brute Power
A powerful Dynamite .28 nitro engine gives you all the grunt you need to be a front runner, right out of the box. It is equipped with a convenient pull-start so you don't have to buy a starter box to get racing right away.
Metal-Gear Drivetrain and Sealed Differentials
A metal-gear transmission and sealed differentials give the truggy all the durability it needs for long mains and rough conditions.
Center and Rear Dogbones
These eliminate the friction of a CV coupler and improve bump handling in the rear of the car.
Pre-Set Suspension Geometry
The suspension geometry is pre-set from the factory to match that used by professional team drivers so you can hit the track with confidence. And because it uses fixed-length turnbuckles and steering arms, you know it will remain consistent race to race.
Key Features
- Your fast track to nitro truggy racing
- 4mm T-6 aluminum chassis plate
- Spektrum™ ultra-torque waterproof metal-gear steering servo
- Gen III radio tray for longer servo life
- Dynamite® .28 nitro engine with pull start
- Pre-set suspension geometry
- Metal-gear transmission and sealed differentials
- Center and rear dogbones
- 15mm adjustable oil-filled shocks
- Spektrum™ waterproof metal-gear servo
- Includes Spektrum DX2E DSMR® transmitter
- Includes Dynamite 1600mAh 6V NiMH receiver pack
Product Specs
Differential
Receiver
Shock Type
Wheel Type
Fuel Tank Capacity
Internal Gear Ratio
Product Length
Spur Gear
Suspension
Power Type
Gear Pitch
Servos
Scale
Radio
Drivetrain
Product Height
Final Drive Ratio
Wheelbase
Approximate Assembly Time
Body
Brakes
Pinion
Tire Tread
Vehicle Type
Ball Bearings
Chassis
Completion Level
Product Width
Club Points Information
Horizon Hobby RC Club:
The points displayed are points you will earn based on your membership level and the cost value of the product. Be sure you are Signed In to your account to see the most accurate points you will earn on your purchase. Points are awarded and available for use once your order has shipped complete.
|
Points per $1 Spent |
Standard |
Legend |
Elite |
|
5 |
15 |
20 |
2000 points = $5 Discount
Points displayed here do not include Bonus Points for select product. If the product is marked with the Bonus Points badge you will also earn the extra "Bonus Points" points listed in the banner in addition to the calculated points displayed
