Backorder
|
Back Order
D645MW Standard Digital High Torque Metal Gear Servo
Item No.
Hitec RCD Inc. -
HRC36645
$43.99
Backorder
|
Back Order
D645MW Standard Digital High Torque Metal Gear Servo
Item No.
Hitec RCD Inc. -
HRC36645
$43.99
The metal D-645MW is part of Hitec's D-Series servo line. All Hitec D-Series servos have been designed using Hitec's brand new, cutting edge, custom engineering. Combining industry leading high-resolution, state-of-the-art ultra-response technology with a 32-bit MCU and 12-bit ADC for unprecedented programmability and flexibility, these servos deliver significantly smoother movement. The speedy, powerful line operates on a wide 4.8 ~ 8.4 voltage range, allowing use with any common battery chemistry without the need for adapters or regulators. Featuring Hitec’s industry standard 25-tooth output spline with 3mm hex screw, each D-Series servo brings monster performance never known before in the market.
- Programmable PWM Digital Amplifier
- 32-Bit MCU with 12-Bit ADC Circuitry
- 4096 Resolution
- 1M Cycle Long Life Potentiometer
- Wide Operating Voltage (4.8 ~ 8.4 Volts DC)
- Dual Ball Bearing Supported Output Shaft
- 25-Tooth Output Spline
D645MW Standard Digital High Torque Metal Gear Servo
Item No.
Hitec RCD Inc. -
HRC36645
Product
$43.99
Add Ons
Estimated Total:
$43.99
RC Club points earned on this item shown at checkout.
ⓘ
Selected Store
Product Details
In The Box
- (1) D645MW Standard Digital High Torque Metal Gear Servo
Quick Links
Manuals & SupportHighlights of the D-Series Servos
Product Specifications
| Current Draw Idle | 30mA |
| Product Width | 0.77" (20 mm) |
| Application | 12-15lb Sport, 3D performance & scale airplanes, 2M & up sailplanes, 600mm electric helis, 50-59 class gas helis, 1:10 scale on/off-road vehicles, 1M & scale sail boats, 1/10 scale power boats |
| Product Weight | 2.11 oz (57.0g) |
| Spline Count | 25 Teeth |
| Water-Resistant | No |
| Deadband | 2µs |
| Input Voltage | 4.8V ~ 6.0V ~ 7.4V |
| Product Height | 1.48" (38 mm) |
| Servo Type | Digital |
| Current Draw Stall | 2,650mA |
| Servo Operating Voltage | 4.8 - 7.4V (HV) |
| Bearing | Dual Ball Bearing |
| Bushing Or Bearing | Bearing |
| Gear Type | Metal |
| Wire Gauge | 22 AWG |
| Programmable | Yes |
| Servo Size Category | Standard |
| Connector Type | Universal |
| Maximum Servo Speed | 0.28 sec/60 deg @ 4.8V, 0.20 sec/60 deg @ 6.0V, 0.17 sec/60 deg @ 7.4V |
| Product Length | 1.59" (40 mm) |
| Maximum Servo Torque | 115oz/in @ 4.8V, 158oz/in @ 6.0V, 180oz/in @ 7.4V |
Club Points Information
Horizon Hobby RC Club:
The points displayed are points you will earn based on your membership level and the cost value of the product. Be sure you are Signed In to your account to see the most accurate points you will earn on your purchase. Points are awarded and available for use once your order has shipped complete.
|
Points per $1 Spent |
Standard |
Legend |
Elite |
|
5 |
15 |
20 |
2000 points = $5 Discount
Points displayed here do not include Bonus Points for select product. If the product is marked with the Bonus Points badge you will also earn the extra "Bonus Points" points listed in the banner in addition to the calculated points displayed
