Free Shipping on orders over 99*. Learn More
  $139.99  $99.99
Backorder
Add to Wish List
Backorder now to reserve your place in line! Next Shipment Early Aug

The 80-amp Pro SB brushless ESC with switch-mode BEC and advanced programming allows you to operate up to 7 analog or 6 digital standard-size servos with the BEC on any recommended input voltage.

Image for 80-Amp Pro Switch-Mode BEC Brushless ESC V2: EC5 from HorizonHobby
+ / - Hover over image to Zoom
80-Amp Pro Switch-Mode BEC Brushless ESC V2: EC5 80-Amp Pro Switch-Mode BEC Brushless ESC V2: EC5
  • Overview
  • Specs
  • Reviews
  • Parts & Accessories
  • Manuals & Support

Key Features

  • Up to 80 amps continuous current with proper air flow and 100 amps burst current (15 seconds)
  • 5V switch-mode BEC capable of 5 amps continuous current with 6 amps max burst on any recommended input voltage
  • Drive up to 7 analog or 6 digital standard-size servos with the BEC on any recommended input voltage
  • 3- to 6-cell Li-Po, 9- to 18-cell Ni-MH/Ni-Cd input voltage
  • Programmable motor braking
  • Safe power-arm mode prevents accidental starts
  • Programmable low voltage cutoff with settings for 3-cell Li-Po (9.2V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 74% of battery starting voltage
  • Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)
  • Programmable soft start-up rate - .25 second or 1 second
  • Auto motor shut down if signal is lost or there is interference
  • Programmable timing—5 user-selectable ranges–use with a large variety of brushless motors
  • Two operating modes–Airplane or Heli
  • Pre-wired connectors—E-flite EC5 on battery input and 4.0mm female gold bullets on motor output leads
  • NOTE: Not recommended to use with E-flite Power 60 Brushless Outrunner (EFLM4060B)

Overview

When performance matters in your high-current applications, look no further than the E-flite® 80-amp Pro switch-mode ESC. This is a high-quality, efficient sensorless brushless electronic speed control with an integrated switch-mode BEC. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication. It is capable of up to 80 amps continuous current when using 3- to 6-series Li-Po battery packs. You can drive up to 7 analog or 6 digital standard-size servos with the BEC on any recommended input voltage. Featuring an exposed, finned heat sink aluminum case with lightweight plastic end-caps, safe power-arming along with advanced programmable features such as low voltage cutoff, braking, timing, throttle input range and more, the E-flite 80-amp Pro switch-mode ESC is truly a ‘pro series’ electronic speed control.

This product is not intended for use by children under 14 years of age without direct adult supervision.

Amperage: 60 & Up
Auto Cutoff: Yes
BEC Continous Current: 5A
BEC Voltage: 5.5V Switch-mode
Brakes: Yes
Cells w/BEC: 9-18 cells NiMH, 3-6S LiPo
Connector Type: EC5
Forward: Yes
Maximum Burst Current: 100A
Output Connector: 4mm Gold Bullet, 12AWG leads
Overload Protection: Yes
Programmable: Yes
Time Delay Brake: Yes

Parts Listing

$7.99
In Stock

Optional Accessories

$54.99  $46.74
This item is no longer available
Unavailable
$7.99
In Stock
$7.99
In Stock
$10.49
In Stock
$8.49
In Stock
$26.95  $21.95
In Stock

Manuals

FAQs

Product Support Tips

Product Support

Technical questions about this E-flite product should be directed to Horizon Hobby's Product Support Department:

Horizon Hobby, LLC.
ATTN: Product Support

2904 Research Road
Champaign, IL 61822


To Contact Product Support please email us at

Sales Support

If you would like to purchase this product, please go to the Store Locator or contact the Horizon Hobby Consumer Sales Department:

Horizon Hobby, LLC.
ATTN: Consumer Sales

2904 Research Road
Champaign, IL 61822
Email: