Intuitive and easy to use button and LEDs for frequency selection
Provides 5v power output for FPV cameras
Small sized and light weight
Transmitter frequency: 5658-5925MHz with 200mW power output
Transmitting distance > 500-1000m (open area)
SMA Antenna connector
Dimensions: 32 x 22 x 9mm (not including SMA adapter)
Audio: Includes on board microphone
The Lumenier TX5G2R Mini 200mW 5.8GHz 32CH FPV video transmitter is the perfect VTX for FPV racing! The 200mw transmission power is a good medium power ouput meaning more pilots can fly together without overpowering each other on close frequencies while still getting decent range. The TX5G2R has 32 channels including the new Raceband frequencies. Our friends from ImmersionRC first divided the 5.8 band into 8 channels evenly spread out 37MHz from each other, which allows more racers flying at the same time on the same band. Lumenier Raceband transmitters are fully compatible with FatShark and ImmersionRC receivers. The Tx includes a 5v output to power FPV cameras and an on-board microphone to transmit audio to your receiver.
The TX5G2R features an easy to use single button, LED interface. It also comes with a clean pre-wired harness, and only weighs 7.5g! It stays cool to the touch during operation, so you don't have to worry about it overheating in a crash.
Note: TX antenna must be installed properly before it is switched on. Powering on without installing an antenna, or using an improper antenna may easily burn the TX, and such damage is not covered by warranty. When using this transmitter on builds with ESC's that feature regenerative braking, we strongly recommend powering the transmitter with the included 12V step down regulator to protect it from voltage spikes.
Operating Voltage: 7 - 20V
Supply current: 200 mA
Operating Temperature: -10 +85 C
Video Band Width: 5-6 MHz
Audio carrier Frequency: 6.5 MHz
Video Input Level: 0.8,1.0,1.2 Vp-p
Video Input Impedance: 75K Ohm
Audio Input Level: 0.8 ,2.0 Vp-p
Audio Input Impedance: 10K Ohm
Weight: 7.5g (without antenna)
Antenna Connector: SMA Female Connector
Video Format: NTSC/PAL
Frequency Selection: Single push to change CH, push and hold for 2 seconds to change FR
What's in the box?
(1) Transmitting unit (VTX) TX5G2R
(1) Antennas (2db)
(1) Power/Video cable
Locking connector, female JST for voltage in, female servo plug for video and 5v out