This motor comes standard with the Force RC Aire Batix plane. The prop is a 12x8 electric.
The flying weight is about 55 oz and flys this plane with power to spare.. After 20 flights I
have not had any problems with this motor.

I was given a repaired eflite PT-17 15e & decided to upgrade the motor that was on it to a 4s system using the 880kv bl15. Unlimited vertical! Swingin a 12x6 apc, pulls that arf around with authority. 7 minute fights too!

I nosed (crashed) my Pulse 15e into the ground a few weeks ago. Bad split S maneuver. Too low to the ground. Ordered replacement fuselage and some other needed parts and rebuilt plane. The motor took the hit hard and apparently the bearings inside got beat up. Motor sounded really bad, so I took it apart and cleaned it up. After putting it back together, it still sounded bad. Looked online and found an eBay vendor selling replacement bearings that will fit. Got them and installed the new bearings. Motor sounded better but now the plane appeared to be a bit sluggish on take off and inflight. Maybe less RPMs? Not sure.

Bit the bullet and ordered a new BL15 motor. Just installed it and now I need to get it up in the air and see how it flies. At this time there is no rating on the motor because it will probably just work like a new plane. Shipping was not the speediest but it came within a week or so.

Just bought the new horizon hobby eflite Pulse 15e basic bnf from a local hobby store, and i was pretty disappointed in the construction quality of the aircraft, including the electronics. after fully assembling the aircraft, and plugging in the battery, binding it to my transmitter, and getting it powered up, i immediately get an error message from the motor. No matter what i do, i cannot get rid of this error message. Broken from the factor? not sure if it is broken, but more likely a 'dud' product. Looks like the power to weight ratio is pretty good for this plane with this motor, but unfortunately i cant fly it since its broken.