Blade mCP X Main Rotor Head Replacement Request Bulletin and Supplemental Pre-Flight Checklist
Blade mCP X Main Rotor Head Replacement Request Bulletin
Attention Blade mCP X Owners
Horizon Product Support has received reports from customers concerning the new Blade mCP X ultra-micro collective pitch helicopter. Specifically, some customers have reported Main Blade Grips separating from the Main Rotor Head. Horizon Product Development has updated the main rotor head assembly and is offering it free of charge to end consumers. Please inspect your Main Blade Grips. If your helicopter does not have a “B” molded into the blade grips, complete the Blade mCP X Main Rotor Head Replacement Request form below.
Upon receiving your request, an updated head assembly will be sent to you free of charge as supplies become available.
Click HERE to complete the Blade mCP X Main Rotor Head Replacement Request form.
Horizon will pay for ground shipping within the United States and Canada.
Consumers outside the US and Canada should contact their local retailer or distributor, which may be found HERE.
If you have any questions, you can call Horizon Hobby Product Support at 877-504-0233.
Click here to see instructions on how to install your blade grips
We apologize for this inconvenience. Horizon disclaims all liability and warranties for any consumer failing to act upon this product bulletin.
Blade mCP X Supplemental Pre-Flight Checklist
Your Blade mCP X is a high-performance collective pitch helicopter with a rotorhead that is much more complex than that of most of the ultra micro helicopters you may have flown before. Unlike the rotor heads of most fixed pitch ultra micro helis, the mCP X rotor head has many more moving parts that require thorough inspection before every flight. Following the steps in this supplemental checklist will help you avoid unsafe flying conditions and keep your mCP X performing at its best.