Status LED indicates ready-to-charge, charging, charging-complete status
The AC EZ-Peak™ 4amp NiMH charger combines simple plug-in-and-charge operation with selectable charge rates and installed Traxxas High-Current Connector for convenient charging of all Traxxas Power Cell NiMH batteries. Just plug in a 5- to 8-cell NiMH or NiCad battery pack and the EZ-Peak begins charging at the charge rate you select. Charge at one amp for receiver packs, two amps for the Power Cell 1200mAh batteries included with Traxxas 1/16 models, or four amps for 3000–5000mAh Power Cell NiMH packs. Advanced peak-detection circuitry makes sure the battery receives a perfect charge, every time for peak performance and maximum run time. The status LED flashes red to indicate charging is in progress, then turns green when charging is complete.
The EZ-Peak 4amp charger is equipped with a Traxxas High-Current Connector for use with all Traxxas NiMH Power Cell™ packs and other NiCad and NiMH packs with Traxxas connectors. Adapters are sold separately for charging receiver packs and batteries with Molex connectors.