A First-Rate Gas Power Plant – For a Low Tower Hobbies Price!
The DLE-30cc Gas Engine gives pilots premium flight performance for an affordable price. Features include a fully automatic electronic ignition unit, a muffler, a rear mounted pumper carb and an aluminum alloy crankcase.
- Simple, lightweight design.
- Advanced CNC machining-processed.
- Aluminum alloy crankcase.
- Fully automatic electronic ignition.
- Purpose-designed cylinder, pistons and crankshaft.
- Sealed dual crankshaft bearings.
- High power-to-weight ratio.
High-quality carb included!
Electronic Ignition Unit included!
Loaded with "extras!" With DLE, accessories are an added value instead of an extra cost. The DLE-30 package includes a muffler, spark plug, gasket, bolts, machined aluminum standoffs, throttle arm extension & manual.
- Two sealed bearings on crankshaft-simple design for lighter weight
- Aluminum alloy crankcase
- Rear mounted pumper carburetor ensures easier installation and smooth idling and dependable fuel flow during flights
- Fully automatic electronic ignition Ignition Sensor available separately
Product Specs
Ignition Weight
Muffler Weight
Cylinders
Total Weight
Muffler Type
Bore
Crankshaft Type
Power Type
Plug Type
Stroke
Prop Range
Starter Type
Engine (Only) Weight
Displacement
Oil Type & Content
Product Length
Product Height
Compatibility
No results for your given fitment filters
Get Info From Communities
FAQ
It's a DLE carburetor, but similar to Walbro in design and function.
Product Details
In The Box
- (1) DLE 30cc Gasoline Powered Engine
- (1) Spark plug
- (4) Standoffs
- (1) Ignition
- (1) Muffler
- (1) Muffler gasket
- (2) 5x20mm muffler bolts
- (4) 5x60mm mounting bolts
- (1) Product manual
Needed to Complete
- Gasoline with at least 87 octane rating
- 2-cycle oil, mix ratio for this engine is 30 parts gas to one part oil and must be followed exactly for warranty consideration and optimum performance
- 4.8 - 6V NiMH/NiCd, or 6.6V LiFe or 7.4V LiPo battery for ignition (separate receiver style pack can be used)
- NOTE, 1st version ignition is marked 'A-01' on the label and requires a regulator if using 2S LiPo/LiFe battery If ignition module is the A-02 model it has a built-in voltage regulator. Model A-02 designation is located above the word "Ignition" on top of the case
- Propeller
- 1/8" gasoline tubing
- Field equipment