Packed with power!
Enjoy plentiful power on demand with the DLE Engines DLE-170cc Twin Gas Engine! Includes advanced CNC machining, an Electronic Ignition Unit, twin mufflers, a customized carburetor and more.
- Special, bearing-equipped aluminum alloy crankcase.
- Advanced CNC machining.
- Horizontally-opposed twin cylinders reduce vibration.
- Simple design allows for a high power-to-weight ratio.
- Automatic electronic ignition.
- Double V-type reed valves, bottom-induction design.
- Includes mount, spark plugs, gaskets, bolts, machined aluminum standoffs, a throttle arm extension and mounting template.
- 2-year limited warranty through Hobby Services* beginning at date of purchase.
*DLE Engines sold by Tower Hobbies, come with a 2 year limited warranty. Service is provided by Hobby Services in Champaign, IL.
Like all DLE engines, the DLE-170 cc is loaded with "extras" which add value instead of cost. The DLE-170 package includes mufflers, spark plugs, a throttle arm extension and a mounting template.
The included Electronic Ignition Unit provides simpler starts, higher performance and reduced noise.
- Horizontally opposed twin cylinders for low vibration operation
- Special aluminum alloy crankcase
- Electronic ignition for simpler starts, higher performance and minimal RF noise **Ignition Sensor available separately**
- Sealed ball bearings
- Double V-type reed valves, bottom induction
Product Specs
Displacement
Oil Type & Content
Cylinders
Product Length
Ignition Weight
Muffler Weight
Bore
Crankshaft Type
Power Type
Plug Type
Stroke
Engine (Only) Weight
Muffler Type
Product Height
Prop Range
Starter Type
Product Width
Total Weight
Compatibility
Hangar 9 - HAN5280CDLE130
Hangar 9 - HAN5280CDLE170
No results for your given fitment filters
Get Info From Communities
FAQ
This is a 2-stroke engine.
Product Details
In The Box
- (1) DLE-170cc Gasoline Engine
- (2) Mufflers with Gaskets and Mounting Hardware
- (2) Spark Plugs
- (1) Electronic Ignition
- (1) Mount
- (1) Throttle Arm Extension
- (4) Machined Aluminum Standoffs
- (1) Mounting Template
- (1) Product manual
Needed to Complete
- 87 octane gasoline
- 2-cycle oil, mix ratio for this engine is 30 parts gas to one part oil and must be followed exactly for warranty consideration and optimum performance
- Ignition Battery: Two 4.8 - 6V NiCd or NiMH batteries OR 7.4V LiPo Packs (separate receiver style pack can be used)
- NOTE, 1st version ignition is marked 'A-01' on the label and requires a regulator if using 2S LiPo/LiFe battery If ignition module is the A-02 model it has a built-in voltage regulator. Model A-02 designation is located above the word "Ignition" on top of the case
- Propeller: 30x12 or 32x10