PRODUCT RECALL: Dynamite 2A NiMH AC Chargers (DYN4113) Sold In Canada as part of the Vaterra 1969 Chevrolet Camaro RS 1/10 RTR (VTR03006)
June 4, 2013
Product: Dynamite 2A NiMH AC Charger (DYN4113)
Defect Issue: This product recall addresses the Dynamite 2A NiMH AC Charger. This charger has not been evaluated for any Canadian Standards and does not bear any recognized certification mark. Horizon Hobby is recalling this product from the Canadian marketplace.
What To Do: Return the product to Horizon Hobby by following the process detailed under Corrective Action below. Consumers following the process will receive a check in the amount of $14.99 USD approximately 14–21 days after the charger is returned. Retailers returning this product will receive a credit for the dealer NET.
Please complete the electronic Return Request form by clicking here or pasting this link (http://www.dynamiterc.com/ProdInfo/Files/DYN4113comboVTR03006_Return_Request_Form.pdf) into your browser.
Upon receipt of the completed form, a prepaid shipping label will be sent to you via email. If no email address is provided on the Return Request form, the shipping label will be mailed to you. Return your charger (not the battery pack or any other part of the product), along with a printed copy of the completed Return Request form. Upon receipt of the product, Horizon Hobby will issue a check in the amount of $14.99 USD. Please allow 14–21 days for processing and delivery.
We apologize for this inconvenience. Horizon disclaims all liability and warranties for any consumer failing to act upon this product recall.
Horizon Service Center (Repairs and Repair Requests)
This product has a Canadian Only Recall. Click Here to learn more.
Li-Po Ready Electronic Speed Control
Motor Guard With Cooling Vents
Low CG, Double Wishbone Suspension For Better Handling
Universal Body Mounts
Officially Licensed 1969 Camaro RS Body
Shaft-Driven 4WD For Excellent Traction
Adjustable Battery Strap Adapts To Different Batteries
Wider Rear Tires For Better Grip
Low Profile Tires On Large Diameter Wheels
Dynamite® 6-Cell 7.2V 1800mAh Ni-MH Battery and Dynamite 2A Ni-MH AC Peak Charger Included
Spektrum™ DX2E 2.4GHz Transmitter with Batteries Included
Sealed Gear Boxes and Drive Shaft Tunnel
Double wishbone suspension
Wheels are interchangeable with most HPI and Tamiya wheels **
Wheels/Tires are interchangeable with most HPI and Tamiya wheels/tires. Note, some HPI and Tamiya wheels/tires contain a heavier back side of the wheel which will require the removal of the Vaterra® touring car calipers
Needed To Complete
Nothing! Everything you need is in the box!
Spektrum™ DX2E 2.4GHz Transmitter with Batteries
Dynamite® 6-Cell 7.2V 1800mAh Ni-MH Battery
Dynamite 2A Ni-MH AC Peak Charger
Armstrong walked on the moon, baby boomers rocked Woodstock, and Route 66, America’s Mother Road, resonated with the rumble of the Chevy Camaro. Designed to dethrone the Mustang, the 1969 Camaro could pack up to 396 cubic inches of power under its hood. Its aggressive, low profile stance gave the impression of a panther ready to pounce. Even today, the ‘69 Camaro turns heads at car shows, cruise nights and anywhere else a love for big-displacement, Detroit power endures.
This stunning reproduction of the ’69 Chevrolet Camaro RS comes with a detailed body, low profile tires and large diameter wheels that perfectly capture the cool menace of this American muscle car classic. Lurking beneath this sleek exterior is the power and poise of a V100-S chassis. Its potent Dynamite® power system and shaft-driven 4WD deliver all the speed, traction and control you need to earn serious street cred right out of the box.
Roll down the street with this stunning reproduction of the ’69 Camaro RS and watch the heads turn. Its detailed body and low profile stance perfectly capture the cool menace of a muscle car classic. Lurking beneath this sleek exterior is the power and poise of a V100-S chassis. Its potent Dynamite® power system and shaft-driven 4WD deliver all the speed, traction and control you need to earn serious street cred right out of the box.
The V100-S chassis gives you a balanced, neutral handling car with a wide range of tuning options. It also features universal body mounts that are compatible with most other 1/10-scale bodies. The elegant aggression is present in every line and curve of the officially licensed body. Details include side view mirrors, chromed exhaust tips and clear headlights. Life on the street isn’t always dry and weather is often less than perfect. That’s why it's equipped with a waterproof receiver, speed control and steering servo so you can run in all kinds of conditions.*For complete details on waterproof standards, please refer to the product instruction manual. The shaft-driven 4WD delivers excellent traction on paved surfaces and superb drift control when sliding across loose surfaces. The differentials are sealed against the elements and can be tuned for a variety of running conditions. The low-profile tires and 54mm wheels, along with the detailed appearance of real brakes and calipers, look as good on display as they do on the move. The rear tires also have a little more meat than the fronts for better grip and a little more attitude.
** Note, some HPI and Tamiya wheels/tires contain a heavier back side of the wheel which will require the removal of the Vaterra touring car calipers.