Park 370 Brushless Outrunner, 1200Kv with 4mm Hollow Shaft: 3.5mm Bullet
Park 370 Brushless Outrunner, 1200Kv with 4mm Hollow Shaft: 3.5mm Bullet
Park 370 Brushless Outrunner, 1200Kv with 4mm Hollow Shaft: 3.5mm Bullet
Park 370 Brushless Outrunner, 1200Kv with 4mm Hollow Shaft: 3.5mm Bullet
Park 370 Brushless Outrunner, 1200Kv with 4mm Hollow Shaft: 3.5mm Bullet
Park 370 Brushless Outrunner, 1200Kv with 4mm Hollow Shaft: 3.5mm Bullet
Park 370 Brushless Outrunner, 1200Kv with 4mm Hollow Shaft: 3.5mm Bullet
In Stock

Park 370 Brushless Outrunner, 1200Kv with 4mm Hollow Shaft: 3.5mm Bullet

Item No.
E-flite - EFLM1210HS
5
$45.99
RC Club points earned on this item shown at checkout.
Product $45.99
Add Ons
Estimated Total: $45.99
Estimated Total: $45.99
The link to Park 370 Brushless Outrunner, 1200Kv with 4mm Hollow Shaft: 3.5mm Bullet has been copied
Selected Store

Overview

E-flite’s latest Park 370 is a brushless outrunner motor that features a 4mm hollow shaft, ideal for use with variable pitch propellers. It’s perfectly designed for electric models equipped with variable-pitch propeller systems, such as the E-flite® ShowStopper VPP system. However, you don’t need a VPP to use this motor—it’s an excellent motor for small 3D airplanes that weigh 7–14 ounces. A motor mount, prop adapter and all hardware are included.

Needed To Complete

12–20A brushless ESC

2–3S Li-Po or 6–10 Ni-Cd/Ni-MH

8x3.8–10x4.7 Slow Flyer Prop

Variable Pitch Prop option

Key Features

  • Ideal for models requiring up to 120 watts of power
  • Optimized windings for 3D performance
  • High-torque, direct-drive alternative to inrunner brushless motors
  • Includes mount, prop adapters and mounting hardware
  • 4mm hollow shaft is easily reversed for alternative motor installations
  • Excellent motor for small 3D airplanes 7–14 oz (200–400 g)
  • Extremely lightweight—just 1.6 ounces
  • Ideal for variable pitch props such as the E-flite® Showstopper Variable Pitch Prop System
  • External rotor design for better cooling
  • High-quality construction with ball bearings

Product Specs

Bushing Or Bearing
Bearing
Recommended Prop Range
8x3.8–10x4.7 or Variable Pitch systems
Resistance
.18 ohms
Shaft Diameter
4mm (.16 in) hollow
Motor Type
Brushless
Motor Design
Outrunner
Adjustable Timing
No
Voltage
7.2–12V
Connector Type
3.5mm Bullet
Idle Current (Io)
.60A
RPM/Volt (Kv)
1200