PRODUCT BULLETIN: Blade 600 X Wiring Harnesses with Castle Creations ESCs
December 17, 2013
Product: Blade 600 X (BLH5625, BLH5625C, BLH5625CSE, BLH5625CCSE) Wiring Harnesses with Castle Creations ESCs.
Issue:The wiring harness included with the Blade 600 X and Castle Creations ESCs are not compatible. Using them together may damage the ESC, which could result in a crash.
What To Do: Do not use the wiring harness included with the Blade 600 X with a Castle Creations ESC. Follow the instructions included with the Castle Creations ESC.
If you have any questions, please call Horizon Hobby Product Support at 888-959-2304. If you purchased your product outside of US and Canada, please see the retailer or distributor you purchased your product from for assistance.
We apologize for this inconvenience. Horizon disclaims all liability and warranties for any consumer failing to act upon this product bulletin.
Country of Purchase
United States of America
Horizon Product Support (Product Technical Assistance)
Triple ball bearing-supported, 10mm solid steel main shaft
Integrated bearing block servo mount design
Torque-tube driven tail with aluminum tail boom and case
Dual-point tail pitch slider and balanced tail grips
Revolution® 95mm tail blades
Revolution 600mm carbon fiber main blades
E-flite® Heli 700, 500Kv brushless outrunner motor
Spektrum™ AR7200BX 7-chanel DSMX® flybarless control system
Phoenix Edge 80HV, 50V 80-Amp ESC included
Spektrum H6040 digital, high-speed cyclic servos
Spektrum H6080G gyro servo
E-flite 10A BEC
Needed To Complete
- 6+ channel DSM2/DSMX transmitter with helicopter programming - Batteries (2 x 22.2V 6S 3200–4400mAh LiPo) - Charger - Tools for assembly
If you feel like what you're flying is keeping you from realizing your full potential as a 3D master, shatter those limits with the explosive power and performance of the Blade 600 X. It shares the same frame and rotor head with the Blade 550 X, but adds the extra punch of an E-flite® Heli 700, 500Kv brushless motor. This abundance of power, along with the set of Revolution® 600mm carbon fiber blades and longer tail boom, will allow you to confidently explore the extremes of 3D flight with performance to spare.
1 x Revolution® Flybarless 600mm carbon fiber main blade set 1 x Revolution 95mm carbon fiber tail blade set 1 x E-flite® Heli 700, 500Kv brushless outrunner motor 1 x E-flite 10A BEC 1 x Sleek pre-painted fiberglass canopy 1 x Spektrum™ AR7200BX 7-chanel DSMX® flybarless control system 1 x Phoenix Edge 80HV, 50V 80-Amp ESC included 3 x Spektrum H6040 digital, high-speed cyclic servos 1 x Spektrum H6080G gyro servo