This item is no longer available. Updated or related products shown below:
Items which are considered "oversize" are noted on horizonhobby.com. Oversize packages will not ship 2 Day, Overnight or Saturday Delivery. For shipments to Puerto Rico, please call for a shipping quote.
Oversized items are not eligible for Gift Wrapping.
August 28, 2014 (Click Here for PDF version)
Products: LOSI® Desert Buggy XL™ (LOS05001) Steering and Throttle servos (SPMS901) on vehicles purchased before October 1st, 2014.Issue: During manufacture, Desert Buggy XL steering and throttle servo wires may be pinched or damaged by the receiver tray. A pinched or damaged wire may result in damage to the product.What to Do: Inspect the steering servo and throttle servo leads/wiring. If lead insulation is pinched or damaged, fill out the Return Request form found at http://www.losi.com/ProdInfo/Files/DBXL_Servo_ReturnForm.pdfHorizon Hobby will provide a shipping label to return the damagedservo. Once the damaged servo is received, Horizon Hobby will reepair the wiring and mail the servo back to you.
Remove and install servo(s) (SPMS901):Remove the servo and fill out the Return Request form found athttp://www.losi.com/ProdInfo/Files/DBXL_Servo_ReturnForm.pdf. Horizon Hobby will provide a shipping label to return the damaged servo. Once the damaged servo is received, Horizon Hobby will repair the leads and mail the servo back to you.1. Disconnect the damaged servo(s) from the STR or THR port on the receiver.2. Remove 4 servo screws using a 2.5mm hex wrench, any spacers and the servo from the receiver tray.3. Install a servo in the receiver tray using the screws and any spacers.Tip: The steering servo has 4 screws (rear screws are short, front screws are long) and a spacer. The throttle servo has 4 long screws and 2 interchangeable spacers.4. Route the servo wires under and around the receiver tray. Where needed, apply tape to keep the wiring from being pinched between the tray and the chassis.5. Connect the servo to the appropriate receiver port.6. Assemble the buggy in reverse order. IMPORTANT: Do not overtighten screws or plastic parts may be damaged beyondrepair.7. Before installing a servo arm on a servo, make sure there is no transmitter trim for the servo, then power ON the servos so they self-center.
Built big and bold to deliver high impact excitement, the Losi® Desert Buggy XL™ vehicle makes its presence known with a roaring 23cc gasoline engine. This Losi 1/5th scale buggy powerhouse is designed to withstand the rigors of intense off-road driving with a terrain-killing 4WD drivetrain and a heavy-duty construction that pulverizes the terrain at ballistic speeds. With a rigid injection molded roll cage built on a reinforced 5mm aluminum chassis, the Desert Buggy XL can withstand the punishment of the most brutal driving styles. The Desert Buggy XL is also in for the long haul with a large-capacity gas tank that provides over 40 minutes of relentless action on a full tank. When maintenance is a necessity, the roll cage can be removed for easy access to the chassis. The Losi Desert Buggy XL vehicle is large scale RC driving excitement at its most satisfying.
Technical questions about this Losi product should be directed to Horizon Hobby's Product Support Department:
Horizon Hobby, LLC. ATTN: Product Support 2904 Research Road Champaign, IL 61822
To place a Horizon Hobby Support Inquiry please visit our Inquiry Form Support Phone:(877) 504-0233 Fax:(217) 355-1552
If you would like to purchase this product, please go to the Store Locator or contact the Horizon Hobby Consumer Sales Department:
Horizon Hobby, LLC. ATTN: Consumer Sales 2904 Research Road Champaign, IL 61822 Email: email@example.com Sales Phone:(800) 338-4639 Fax:(217) 355-1552
Stay in the Know: Sign up to join our Mailing List
Copyright © Horizon Hobby