RC has never been more affordable to enter into as it is now, and the quality of what is now considered to be entry-level equipment rivals what was considered to be the top-tier equipment just a short time ago. With JR SPORT you can get the high level of performance you want with a budget friendly price you desire. JR SPORT makes it easy to determine what servo is best for your application, thanks to their simple naming structure. If you look at the servo's name it will indicate the size and features of the servo for you at a glance. For example look at the MN48. MN denotes a mini size case and the 48 refers to 48 oz/in of torque @ 4.8volts. All JR SPORT servos feature universal connectors that will plug into major brand receivers and they still feature JR’s industry leading 3-Year warranty
|Application:||20- to 40-size Aircraft|
|Bushing Or Bearing:||Bearing|
|Height:||1.02 in (25.9mm)|
|Length:||1.30 in (33.0mm)|
|Servo Voltage:||4.8 - 6.0V|
|Size Category:||Minis and Micros|
|Speed:||0.18 sec/60° @ 4.8V; 0.15 sec/60° @ 6.0V|
|Speed (at 4.8V):||.15 - .19 sec|
|Torque:||48 oz-in (3.5kg-cm) @ 4.8V|
|Torque (at 4.8V):||40 - 99 oz-in|
|Weight:||0.8 oz (22.7g)|
|Width:||0.58 in (14.7mm)|
Here are some articles we think will be of interest to you as you consider Horizon Hobby products. We'll add new relevant articles as they become available.
Digital and analog servos have very similar construction and components. They both use the same type of motors, gears, cases, and have a potentiometer. A digital servo is different in the way it processes the incoming signal and converts that signal into servo movement.
An analog servo when it receives a command to move, takes that signal and sends pulses to the servo motor at about 50 cycles per second, which in turn moves the motor to its required position determined by the potentiometer.
A digital servo has a micro-processor that receives the signal and then adjusts the pulse length and amount of power to the servo motor to achieve optimum servo performance and precision. A digital servo sends these pulses to the motor at a much higher frequency which is around 300 cycles per second. This helps eliminate deadband, provides a faster response to the servo motor, smoother motor movement, and has higher resolution and holding power than an analog servo.
There are some disadvantages to digital servos, but the disadvantages are not in any way close to out weighing the advantages. A digital servo will have a higher power consumption (Around 10 to 15 mAh per servo at idle) than an analog servo due to its higher pulse frequency, so larger capacity battery packs are recommended. Digital servos also are more expensive than analog servos which can get very costly in applications that require many servos.
For JR servos we recommend Tamiya ceramic grease (TAM87025).
There are several scenarios which may attribute to this problem.
1. The servo arm fit on the output spline may be loose.
2. There may be slop or wear in the gear train.
3. There may be slop or binding in the linkages.
4. You may have a faulty servo saver.
5 The push rods may be too flexible.
6. Improperly mounted servo (screws too tight, mounting rail too tight against the servo)
7. Faulty extention, damaged lead or dirty connector.
8. Worn or dirty pot.
The frequency on operation is so high that it feeds back with FM receivers.