Extremely Versatile and An Absolute Blast to Fly - Ideal for those making the transition from electric trainers, or any RC pilot looking for a spirited sport plane that goes together fast.
You must use a separate BEC or an onboard receiver battery pack when utilizing the quad flap option due to the higher number of servos used in the aircraft and higher current load. Brushless speed controls are not rated to handle more than four servos under load. Please consult the brushless speed control instructions for details and how to disable the BEC on your speed control.
Replace with a separate BEC, such as the UBEC, available from www.koolflightsystems.com or use a separate 4.8V receiver battery pack.
For your convenience, the Mini Ultra Stick features pre-installed pushrod tubes. If you are experiencing any issue with the pushrods sticking and do not have a free movement of the rods, please use an X-acto to open up the ends of the tubes. The tubes were cut at the factory and in some cases crimped from the cutting process. You should check this when you install your pushrods.
4+ Ch Radio
4 Sub-micro Servos
Servo Extensions & Y-harness
4 to 6-Ch Receiver
Based on the popular Hangar 9 Ultra Stick, the E-flite Mini Ultra Stick comes 95% prebuilt from balsa and light-ply and is covered in genuine UltraCote. At the heart of the Mini Ultra Stick’s fun factor are two firewall options that let you use a wide variety of motor sizes, types and brands. This along with the ample clearance for larger props that its tall, lightweight aluminum landing gear provides gives the Mini Ultra Stick huge performance potential. You can push the envelope even further by adding the optional split quad-flaps.
The Mini Ultra Stick can be assembled and ready for flight in just 1 to 2 hours thanks, to:
- Preinstalled control surfaces and hinges
- Preinstalled control horns
- Preinstalled pushrods
- Bolt-on horizontal and vertical stabilizers
- Preassembled landing gear with wheels attached
|Motor Size:||Park 400 Inrunner or Park 450 Outrunner|
|Approx Flying Duration:||10-20 Minutes|
|CG (Center of Gravity):||2.25 in (57mm) behind the leading edge|
|Control Throw (Ailerons):||1/2 in (15mm) Up/Down Low Rate or 5/8 in (19mm) High Rate|
|Control Throw (Elevator):||9/16 in (18mm) Up/Down Low Rate or 7/8 in (23mm) High Rate|
|Control Throw (Rudder):||7/8 in (23mm) Right/Left Low Rate or 1-1/4 in (32mm) High Rate|
|Flying Weight:||22 - 25 oz (625 - 710g)|
|Gear Ratio:||6.5:1 when using Park 400 Brushless Inrunner|
Stay in the Know: Sign up to join our Mailing List