2.99Shipping
Generic Application Error Test JSP (Item)

The store has encountered a problem processing the last request. Try again later. If the problem persists, contact your site administrator.



Image for 1/10 Comp Crawler Race Roller from HorizonHobby
+ / - Hover over image to Zoom
Share
Email a Friend

Key Features

  • Compact front & rear locking (DIG) center transmission allows the crawler to overtake obstacles with ease
  • Front and rear solid axle with worm gear drive
  • 4-link suspension offers 70 degrees of articulation and minimizes front and rear axle swing, allowing for more precise handling
  • Zero Ackerman steering provides class leading performance with 45 degrees of steering throw
  • Front and rear locked differential provides full time 4WD
  • 3-piece 2.2-inch beadlock wheels with aluminum outer rings
  • National Champion 2.2 Losi Rock Claws Tires with foam inserts
  • Twin Vertical Plate chassis with adjustable upper shock mounts
  • 4-inch aluminum threaded shocks with titanium nitride (TiNi) shafts allow the suspension to articulate without any binds
  • Durable, telescoping CV driveshafts allow increased steering range
  • Aluminum upper and lower suspension links for added strength
  • Lexan Grappler Pro body is optimized to USRCCA rules and allows for clearance of the tires as they articulate
  • Race Roller chassis is preassembled; simply add electronics, paint the body and go

Needed To Complete

Basic set-up
• Brushless Motor and ESC
• 2-3-Cell LiPo 
• Charger for above battery (LOSB9605 Intelligent Lithium Charger)
• High-torque Steering Servo (Min. of 200 oz) (JRPSZ9100T Digital Ultra-Torque MG Servo)
• 2-Channel Radio System
• Paint

Advanced Completion: To take full advantage of the DIG setup and the true potential of the 1/10 Comp Crawler
• 3-Channel Radio System with 3-position 3rd channel switch (SPM3100 DX3R DSM2 Radio System)
• Mini Steering Servo (LOSB0822 MSX12 Digital Mini Servo)

Video Overview

Overview

Incorporating real engineering elements from full-size rock crawling competition, the 1/10 Comp Crawler represents the pinnacle of RC rock crawling design. Every part, every feature and every inch is designed to mimic real-world competition platforms, resulting in the most advanced 1/10-scale radio control crawler ever developed.

The list of innovations that make the Comp Crawler an RC revolution is long, and it starts with a solid foundation. The Twin Vertical Plate (TVP) chassis with adjustable upper shock mounts offers unbeatable stability and rigidity in a durable, lightweight design. The result is confident handling over any terrain and outstanding suspension articulation. And Team Losi Racing has gone one step further, by offering this innovative crawling chassis pre-built and tuned right out of the box. All you have to do is add the electronics of your choice and paint the included Lexan Grappler Pro body.

Team Losi Racing’s Comp Crawler is the first rock crawling platform in the industry to offer a revolutionary front and rear “dig” transmission. The use of an optional third channel setup allows the front or rear drive axle to be disengaged, locking the wheels in place and acting as a steering brake for precise lateral movement on and over obstacles. The transmission case has been fitted with adjustable servo mounts that will allow for the use of most “mini” servos and includes an aluminum servo arm. The third channel on a 3-channel radio (such as the Spektrum DX3R) allows the full use of the DIG transmission, and also requires a micro servo installation for actuation. If you do not have a 3-channel radio system or extra servo, there is no need to worry - the Comp Crawler will function with full-time 4WD with our without a dig servo hooked up.

The solid axle setup on the Comp Crawler offers a significant reduction in flex for improved performance. Inside, the axles utilize a worm gear drive for outstanding precision in throttle control and maneuverability. Another benefit of the worm gear drivetrain design is the elimination of the “torque twist” commonly found in shaft driven rock crawlers. As a result, the Comp Crawler stays in contact with the ground for uninterrupted grip.

The Comp Crawler features a 4-link suspension layout that offers 70 degrees of suspension articulation. This specially designed 4-link suspension setup is used in combination with the Twin Vertical Plate chassis to reduce axle swing and eliminate side-to-side movement for increased steering and maneuvering precision. 7mm diameter aluminum suspension links are hard anodized and triangulated to the center of the chassis for better balance front to rear when the suspension starts to twist. 4-inch aluminum threaded shocks with titanium nitride (TiNi) shafts allow the suspension to articulate without any binds.

Designed with the demanding conditions of competition rock crawling in mind, the steering system on the Comp Crawler provides precise control as well as class leading performance with 45 degrees of steering throw. The front caster blocks feature 10 degrees of caster and the spindles are attached with heavy-duty steel king pins. The steering geometry also allowed Team Losi Racing engineers to raise the main steering link closer to the axle housing, giving the Crawler additional clearance when approaching obstacles.

Just like full-size crawlers, the 1/10 Comp Crawler utilizes functional beadlock wheels with aluminum outer rings. The functioning beadlock allows for the tires to maintain more contact and traction, while the aluminum outer rings provide evenly distributed pressure for unbeatable tire mounting. Losi’s National Champion Rock Claws 2.2 Tires come mounted on the beadlock wheels, complete with foam inserts. The added ground clearance from the Rock Claws tires makes conquering any and all courses easier.

Body: Clear Lexan Grappler Pro
Chassis: Twin Verticle Plate
Completion Level: Almost Ready-To-Run, Kit
Drivetrain: 4WD
Recommended Environment: Off-Road
Shock Type: 4-Inch Aluminum with Titanium Nitride (TiNi) shafts
Size/Scale: 1/10
Suspension: 4-Link
Tire Type: National Champion Losi Rock Claws 2.2
Wheel Size: 2.2-Inch Beadlock

Parts Listing

Add to Wish List
$7.99
This item is no longer available
Unavailable
$17.99
This item is no longer available
Unavailable
$7.99
This item is no longer available
Unavailable
$10.99
This item is no longer available
Unavailable
$5.99
This item is no longer available
Unavailable
$10.99
In Stock
Add to Wish List
$7.99
This item is no longer available
Unavailable
 $29.44 $30.99
In Stock
Add to Wish List
Add to Wish List
Add to Wish List
$8.99
This item is no longer available
Unavailable
$19.99
In Stock
Add to Wish List
$5.99
This item is no longer available
Unavailable
Add to Wish List
Add to Wish List
Add to Wish List
$8.99
This item is no longer available
Unavailable
$4.99
This item is no longer available
Unavailable
Add to Wish List
$10.99
This item is no longer available
Unavailable
Add to Wish List
Add to Wish List
Add to Wish List
$9.99
This item is no longer available
Unavailable
$19.99
This item is no longer available
Unavailable
$3.99
This item is no longer available
Unavailable
Add to Wish List
$3.99
This item is no longer available
Unavailable
$3.99
In Stock
Add to Wish List
$10.99
In Stock
Add to Wish List
Add to Wish List
Add to Wish List
Add to Wish List
Add to Wish List
Add to Wish List

Hop Ups

 $139.99 $179.99
This item is no longer available
Unavailable
 $37.99 $39.99
This item is no longer available
Unavailable
 $37.99 $39.99
This item is no longer available
Unavailable
 $37.99 $39.99
This item is no longer available
Unavailable
Add to Wish List
$13.99
This item is no longer available
Unavailable
$16.99
This item is no longer available
Unavailable
$19.99
This item is no longer available
Unavailable
$19.99
This item is no longer available
Unavailable
Add to Wish List
$19.99
This item is no longer available
Unavailable

Optional Accessories

Manuals

Parts Explosion

FAQs

Product Support Tips

Warranty Period:

What this Warranty Covers
Horizon Hobby, Inc., (Horizon) warrants to the original purchaser that the product purchased (the "Product") will be free from defects in materials and workmanship at the date of purchase.

Limited Warranty
(a) This warranty is limited to the original Purchaser ("Purchaser") and is not transferable. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE PURCHASER. This warranty covers only those Products purchased from an authorized Horizon dealer. Third party transactions are not covered by this warranty. Proof of purchase is required for warranty claims. Further, Horizon reserves the right to change or modify this warranty without notice and disclaims all other warranties, express or implied.

(b) Limitations- HORIZON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCT. THE PURCHASER ACKNOWLEDGES THAT THEY ALONE HAVE DETERMINED THAT THE PRODUCT WILL SUITABLY MEET THE
REQUIREMENTS OF THE PURCHASER’S INTENDED USE.

(c) Purchaser Remedy- Horizon's sole obligation hereunder shall be that Horizon will, at its option, (i) repair or (ii) replace, any Product determined by Horizon to be defective. In the event of a defect, these are the Purchaser's exclusive remedies. Horizon reserves the right to inspect any and all equipment involved in a warranty claim. Repair or replacement decisions are at the sole discretion of Horizon. This warranty does not cover cosmetic damage or damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or modification of or to any part of the Product. This warranty does not cover damage due to improper installation, operation, maintenance, or attempted repair by anyone other than Horizon. Return of any goods by Purchaser must be approved in writing by Horizon before shipment.

Damage Limits:
HORIZON SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCT, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. Further, in no event shall the liability of Horizon exceed the individual price of the Product on which liability is asserted. As Horizon has no control over use, setup, final assembly, modification or misuse, no liability shall be assumed nor accepted for any resulting damage or injury. By the act of use, setup or assembly, the user accepts all resulting liability.

If you as the Purchaser or user are not prepared to accept the liability associated with the use of this Product, you are advised to return this Product immediately in new and unused condition to the place of purchase.

Law: These Terms are governed by Illinois law (without regard to conflict of law principals).

Safety Precautions:
This is a sophisticated hobby Product and not a toy. It must be operated with caution and common sense and requires some basic mechanical ability. Failure to operate this Product in a safe and responsible manner could result in injury or damage to the Product or other property. This Product is not intended for use by children without direct adult supervision. The Product manual contains instructions for safety, operation and maintenance. It is essential to read and follow all the instructions and warnings in the manual, prior to assembly, setup or use, in order to operate correctly and avoid damage or injury.

Questions, Assistance, and Repairs:
Your local hobby store and/or place of purchase cannot provide warranty support or repair. Once assembly, setup or use of the Product has been started, you must contact Horizon directly. This will enable Horizon to better answer your questions and service you in the event that you may need any assistance. For questions or assistance, please direct your email to feedback@teamlosi.com, or call 888.899.LOSI (5674) toll free to speak to a service technician.


Inspection or Repairs
If this Product needs to be inspected or repaired, please call for a Return Merchandise Authorization (RMA). Pack the Product securely using a shipping carton. Please note that original boxes may be included, but are not designed to withstand the rigors of shipping without additional protection. Ship via a carrier that provides tracking and insurance for lost or damaged parcels, as Horizon is not responsible for merchandise until it arrives and is accepted at our facility. A Service Repair Request is available at www.horizonhobby.com on the “Support” tab. If you do not have internet access, please include a letter with your complete name, street address, email address and phone number where you can be reached during business days, your RMA number, a list of the included items, method of payment for any non-warranty expenses and a brief summary of the problem. Your original sales receipt must also be included for warranty consideration. Be sure your name, address, and RMA number are clearly written on the outside of the shipping carton.

Warranty Inspection and Repairs
To receive warranty service, you must include your original sales receipt verifying the proof-of-purchase date. Provided warranty conditions have been met, your Product will be repaired or replaced free of charge. Repair or replacement decisions are at the sole discretion of Horizon Hobby.

Non-Warranty Repairs
Should your repair not be covered by warranty the repair will be completed and payment will be required without notification or estimate of the expense unless the expense exceeds 50% of the retail purchase cost. By submitting the item for repair you are agreeing to payment of the repair without notification. Repair estimates are available upon request. You must include this request with your repair. Non-warranty repair estimates will be billed a minimum of ½ hour of labor. In addition you will be billed for return freight. Please advise us of your preferred method of payment. Horizon accepts money orders and cashiers checks, as well as Visa, MasterCard, American Express, and Discover cards. If you choose to pay by credit card, please include your credit card number and expiration date. Any repair left unpaid or unclaimed after 90 days will be considered abandoned and will be disposed of accordingly. Please note: non-warranty repair is only available on electronics and model engines.


United States:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Service Center
4105 Fieldstone Road
Champaign, Illinois 61822

All other Products requiring warranty inspection or repair should be shipped to the following address:

Horizon Product Support
4105 Fieldstone Road
Champaign, Illinois 61822


Please call 877-504-0233 or fill out our inquiry form with any questions or concerns regarding this product or warranty.

United Kingdom:
Electronics and engines requiring inspection or repair should be shipped to the following address:

Horizon Hobby UK
Units 1-4 Ployters Rd
Staple Tye
Harlow, Essex
CM18 7NS
United Kingdom

Please call +44 (0) 1279 641 097 or e-mail us at sales@horizonhobby.co.uk with any questions or concerns regarding this product or warranty.

Product Support

Team Losi Racing Support Tab

Team Losi Racing Product Support

Technical questions about this product should be directed to Horizon Hobby's Product Support Department:

Horizon Hobby, Inc.
ATTN: Product Support

4105 Fieldstone Road
Champaign, IL 61822


To place a Horizon Hobby Support Inquiry please visit our Inquiry Form Support Phone:(877) 504-0233
Fax:(217) 355-1552

Sales Support

If you would like to purchase this product, please go to the Store Locator or contact the Horizon Hobby Consumer Sales Department:

Horizon Hobby, Inc.
ATTN: Consumer Sales

4105 Fieldstone Road
Champaign, IL 61822
Email: Sales Phone:(800) 338-4639
Fax:(217) 355-1552