Power 160 Brushless Outrunner Motor, 245Kv: 4mm Bullet
In Stock

Power 160 Brushless Outrunner Motor, 245Kv: 4mm Bullet

Item No.
E-flite - EFLM4160A
4.7
$172.99
RC Club points earned on this item shown at checkout.
Product $172.99
Add Ons
Estimated Total: $172.99
Estimated Total: $172.99
The link to Power 160 Brushless Outrunner Motor, 245Kv: 4mm Bullet has been copied
Selected Store

Overview

The Power 160 is designed to deliver clean and quiet power equivalent to or surpassing the power of a 160-size 2-stroke glow engine for sport and scale airplanes weighing 12 to 20 pounds (5.4 to 9 kg), 3D airplanes up to 15 pounds (6.8 kg), or models requiring up to 2700 watts of power.

It provides excellent power for the popular 27% scale aerobatic models such as the Hangar 9 Extra 260, scale performance for the Hangar 9 P-47D Thunderbolt 150 ARF, and extreme performance for models like the famous Ultra Stick Lite.

Needed To Complete

75A-110A HV brushless ESC
9S–10S Li-Po or 28- to 32-cell Ni-MH/Ni-Cd
18x8 to 20x10 prop

Key Features

  • Equivalent to or surpassing the power of a 160-size, 2-stroke, glow engine for 12–20 lb (5.4–9 kg) airplanes
  • Ideal for 3D airplanes up to 15 lb (6.8 kg)
  • High-torque alternative to inrunner brushless motors
  • Includes mount and mounting hardware
  • External rotor design for better cooling
  • High-quality construction with ball bearings and hardened 8mm steel shaft
  • Includes two 12mm prop shaft adapters tapped out for 10–32 threads
  • Ideal for models requiring up to 2700 watts of power
  • Slotted 14-pole outrunner design

Product Specs

Motor Design
Outrunner
Wire Gauge
13 AWG
Bushing Or Bearing
Bearing
Idle Current (Io)
1.45A @ 10V
RPM/Volt (Kv)
245
Voltage
33.3–38.4
Adjustable Timing
No
Motor Type
Brushless
Connector Type
4mm Bullet
Recommended Prop Range
18x8 to 20x10
Shaft Diameter
8mm (.30 in) (Includes two 12mm threaded prop shaft adapters with 1.5 pitch)
Replacement Parts
Optional Parts

Get Info From Communities

RC 101
Buying Guides
Troubleshooting
Downloads
How-To's

FAQ

It would depend somewhat on the application, whether a sport, scale or aerobatic model. The general rule for three-bladed propeller sizing is to reduce the diameter by one inch, and retain the pitch of the two-blade prop that is suitable. So an 18x10 2-blade would become a 17x10 3 blade.