Park 180 Brushless Outrunner Motor, 2200Kv: 2mm Bullet
Park 180 Brushless Outrunner Motor, 2200Kv: 2mm Bullet
In Stock

Park 180 Brushless Outrunner Motor, 2200Kv: 2mm Bullet

Item No.
E-flite - EFLM1120
5
$34.99
RC Club points earned on this item shown at checkout.
Product $34.99
Add Ons
Estimated Total: $34.99
Estimated Total: $34.99
The link to Park 180 Brushless Outrunner Motor, 2200Kv: 2mm Bullet has been copied
Selected Store

Overview

Ideal for 3D models 2–3 oz (55–85 g) and sport and scale models 3–6 oz (85–170 g) or models requiring up to 30 watts of power.

Needed To Complete

4-6A Brushless ESC

2-3S Li-Po or 4-8 cell Ni-Cd/Ni-MH 

3x3 Direct Drive Prop

Key Features

  • Ideal for 3D models weighing 2–3 oz (55–85 g) and sport and scale models weighing 3–6 oz (85–170 g)
  • Ideal for indoor and outdoor small aerobatic park flyers
  • Extremely quiet and lightweight—just .3 oz (8.5 g)
  • High-torque, direct-drive alternative to inrunner brushless motors
  • Designed for firewall mount or carbon tube mount
  • 4- to 8-cell Ni-Cd/Ni-MH or 2–3S Li-Po
  • Up to 30 watts
  • Includes prop adapter
  • Includes mount, mounting hardware and 2mm gold BL connectors
  • Upgraded performance for indoor motors
  • High-quality construction with ball bearings and hardened steel shaft

Product Specs

Idle Current (Io)
.30A @ 8V
RPM/Volt (Kv)
2200
Motor Design
Outrunner
Adjustable Timing
No
Voltage
4.8–11.4V
Connector Type
2mm Bullet
Outer Diameter
0.63 in (16mm)
Motor Type
Brushless
Bushing Or Bearing
Bearing
Recommended Prop Range
3x3 to 6x3 ‘Direct Drive’ for 2S or 4x4 or 4.5x3 for 3S
Resistance
.91 ohms
Shaft Diameter
1.5mm