In Stock

HS-785HB Giant Scale Analog Karbonite Gear Sail Winch Servo

Item No.
Hitec RCD Inc. - HRC33785S
$54.99
RC Club points earned on this item shown at checkout.
Product $54.99
Add Ons
Estimated Total: $54.99
Estimated Total: $54.99
Selected Store

Overview

The HS-785HB sail winch servo with it's large drum wheel has 3 1/2 revolutions of travel for hauling in even the largest of sails. With its dual ball bearing supported output shaft the HS-785HB will provide years of reliable service.

  • Speed: @4.8V 1.68sec/60' / @6.0V 1.38sec/60'
  • Torque: @4.8V 153oz/in / @6.0V 183oz/in
  • Large Drum Wheel with 3.5 Revolutions of Travel
  • Strong Karbonite Gear Train
  • Dual Ball Bearing-Supported Output Shaft
  • Water and Dust-Resistant Case

Key Features

  • Dual Ball Bearing Supported Output Shaft
  • Large Drum Wheel
  • Perfect replacement winch servo for the Pro Boat Ragazza
  • *** Warning: Do not use thread lockers on Karbonite geared servo as it will cause the output shaft to fail

Detailed Information

Hitec Servo Chart

Product Specs

Current Draw Idle
8 mA
Product Width
1.14" (29 mm)
Torque
@4.8V 153oz/in / @6.0V 183oz/in
Product Weight
3.88oz (110.0g)
Spline Count
24 - Tooth
Water-Resistant
No
Bearing
Dual Ball Bearing
Bushing Or Bearing
Bearing
Gear Type
Karbonite
Maximum Servo Torque
183oz/in
Current Draw Stall
1,800 mA
Motor Type
Brushed
Servo Operating Voltage
4.8 - 6.0V
Deadband
5 µs
Input Voltage
4.8V ~ 6.0V
Product Height
1.96" (50 mm)
Servo Type
Analog
Programmable
No
Servo Size Category
Giant Scale
Product Length
2.32" (59 mm)
The HS-785HB sail winch servo with its large drum wheel has 3 1/2 revolutions of travel for hauling in even the largest of sails. With its dual ball bearing supported output shaft the HS-785HB will provide years of reliable service.

Product Details

icon-box
In The Box
  • (1) HS-785HB Giant Scale Analog Karbonite Gear Sail Winch Servo
HS-785HB Giant Scale Analog Karbonite Gear Sail Winch Servo